FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productTæknilýsing

  • Vöruheiti:
    FlySpark F4 V1 BLS 60A stafla
  • AI eiginleikar:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Hugbúnaðarstuðningur:
    Betaflight, INAV, Ardupilot, EMU-flug, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth & USB-C
  • Tengingar:
    3-6S LiPo
  • Stærð:
    47.8 mm (L) x 47.5 mm (B) x 18.3 mm (H)
  • Uppsetning:
    30.5 x 30.5 mm með 4 mm gatastærð
  • Þyngd:
    34g

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Notkunarleiðbeiningar fyrir vöru

FlySpark F4 V1 flugstýring

Skipulag:
Refer to the user manual for the layout of the flight controller.

Jaðartenging:
Connect peripherals as per the provided diagram.

App & FC stillingar:
Use the recommended apps and follow the configuration instructions.

FC vélbúnaðaruppfærsla:
Connect the flight controller to a PC via USB for firmware updates.

FLYSPARK BLS 60A 4-IN-1 ESC

Skipulag:
Check the layout guide in the manual for proper installation.

Tenging við mótora og rafmagnssnúru:
Connect motors and power cables securely.

ESC stillingar:
Use the FlySpark app for ESC configuration settings.

ESC fastbúnaðaruppfærsla:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A staflaFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Specs lokiðviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

PakkiFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF lágt ESR þétti x 1
  • M3 nylon hneta x 4
  • SH 1.0 mm 25 mm löng 8 pinna snúra (fyrir FC-ESC tengingu) x 1 SH 1.0 mm 75 mm löng 6 pinna kapall* x 1
  • M3*30mm innri sexhyrningsskrúfur x 4
  • DJI 6pinna snúra (80mm) x 1
  • XT60 rafmagnssnúra (100 mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC TengimyndFlySpark-F4-V1-Stack-Flight-Controller-fig-6

Leiðbeiningar um FC & ESC tengingar

Aðferð 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

Aðferð 2:

Bein lóðun

  • Lóðuðu 8 víra við 8 púðana á hvorum enda, fylgdu púðaskilgreiningunum hér að neðanFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Sérstakur flugstýringar

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • Notaðu 6-pinna snúru sem fylgir O3 Air Unit FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • Notaðu 6-pinna snúru kemur með FlySpark F4 V1 BLS 60A Stack

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Athugið:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Tenging við mótora og rafmagnssnúruFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC vélbúnaðaruppfærsla
Þessi 8-bita 50A ESC kemur forhlaðinn með BLHeliS fastbúnaði en einnig er hægt að flassa yfir í Bluejay fastbúnað, sem býður upp á RPM síun og tvíátta Dshot stuðning. Fylgdu þessum skrefum til að uppfæra fastbúnaðinn:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Tengjast við tölvu:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

VARÚÐ:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

Algengar spurningar

Hvernig uppfæri ég ESC vélbúnaðinn?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Skjöl / auðlindir

FlySpark F4 V1 Stack Flight Controller [pdfNotendahandbók
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Heimildir

Skildu eftir athugasemd

Netfangið þitt verður ekki birt. Nauðsynlegir reitir eru merktir *