Flashing Blinky Lights LED Double-Sided Sword

INNGANGUR

An intriguing and dynamic toy that sparks children’s and adults’ imaginations is the Flashing Blinky Lights LED Double-Sided Sword. This sword provides a visually striking experience with its double-sided design and dazzling LED lights, making it ideal for fun or costume parties. It is perfect for midnight battles or themed parties because it runs automatically and lights in a variety of brilliant colors. Six AA batteries are needed to power the sword’s eye-catching light effects. For $19.99, it provides excellent value for anyone searching for a toy that is both intriguing and entertaining. This sword, which is made by Flashing Blinky Lights, enables users to investigate light and motion ideas while fostering science education through interactive play. This sword will look great whether it is used for cosplay, school projects, or simply for fun. Its sturdy design guarantees that it will illuminate the path for several explorations.

LEIÐBEININGAR

Vörumerki	Blikkandi blikkljós
Vöruheiti	Lights LED Double-Sided Sword
Verð	$19.99
Notkunarhamur	Sjálfvirk
Fræðslumarkmið	Vísindi
Fjöldi rafhlaðna	6 AA rafhlöður nauðsynlegar
Stærðir hlutar	26.8 x 1.4 x 1.3 tommur
Framleiðandi	Blikkandi blikkljós

HVAÐ ER Í ÚTNUM

• LED tvíhliða sverð
• Rafhlaða
• Notendahandbók

EIGINLEIKAR

• Dual Saber Configuration: Both swords in the set can be used alone or in tandem since they can be readily joined at the grips to create a single, extra-large fighting saber.
• Bright Red LEDs: Twenty red LEDs are built into each saber, creating vivid illumination for a thrilling visual experience while fighting.
• Hljóðbrellur: The play’s dynamic audio aspect is enhanced by the swords’ fascinating sound effects, which go hand in hand with the LEDs’ flashing.
• Auðveld virkjun: To activate the sound effects and red LEDs, simply push the button on each handle. This makes the experience enjoyable and easy to use.
• Large Sword Size: The sword’s combined length of 52.25 inches makes it a formidable weapon for creative conflicts.
• Fyrirferðarlítill og léttur: Each saber is light enough to handle comfortably and is only 1 inch wide, making it easy to wield.
• This costume accessory gives any outfit a fun and futuristic touch and is perfect for Halloween, cosplay events, festivals, and costume parties.
• Skiptanlegar rafhlöður: For extended play, the three AAA batteries that power the swords can be swapped out.
• CPSIA-Compliant: The product satisfies safety requirements by being tested for lead, phthalates, and other heavy metals.
• Gaman fyrir alla aldurshópa: These swords appeal to a broad age range due to their interactive lights and music, whether they are for children or adults.
• Fun with Education: Using LEDs and sound effects to create a dynamic experience, the sword may pique curiosity about science while still being entertaining.
• Sterk efni: The swords are constructed from durable materials to withstand prolonged use and play.
• Amazing Visual Display: The overall battle experience is improved by the glowing effect created by the translucent red blades.
• Party Favorite: Excellent for cooperative play and a wonderful complement to themed parties or gatherings where a large number of people can participate.
• Excellent for Gifts: A distinctive and entertaining present for cosplayers, fantasy, and science fiction enthusiasts.

UPPsetningarhandbók

• Unpack the Swords: Gently take the swords out of the box.
• Settu rafhlöður: Place three AAA batteries (included) into each saber by opening the battery compartment on each handle.
• Join the Sabers: To create a single, sizable double saber, align the two separate swords at their grips.
• Turn on Lights and Sound: To turn on the LED lights and sound effects at the same time, press the button on each handle.
• Sword Position Adjustment: Hold each saber independently for use alone, or join them for the complete double saber effect.
• Slökktu á eftir notkun: When you’re finished playing, push the button once more to turn off the lights and noises in order to conserve battery life.
• Skiptu um rafhlöður: Put new AAA batteries in each handle if the LEDs or sound effects cease functioning.
• Skoðaðu tjón: Make sure there are no obvious cracks or damage and that the connections between the sabers are tight before each use.
• Verify that both sabers illuminate and make noise when the buttons are pressed to test functionality.
• Geymið á réttan hátt: To prevent unintentional damage, place the sabers in a secure location after usage.
• Forðastu vatn: To protect the electronic parts, keep the swords out of the water and damp svæði.
• Always use the swords in a place that is safe from hazards that could injure players.
• Öryggi rafhlöðu: Don’t combine old and new batteries; instead, dispose of old batteries appropriately.
• Restrict Usage Time: To prolong battery life, restrict playtime if you use the device frequently.
• Haltu hreinu: To get rid of any dust or grime that could have accumulated on the swords’ surface, wipe them off with a dry towel.

UMHÚS OG VIÐHALD

• Tíð þrif: To keep the sword clean and clear of dust or grime, wipe it down with a gentle, dry cloth.
• Skoðaðu rafhlöðurnar: Frequently inspect the battery compartment for corrosion or leaks. Use a cotton swab to clean the contacts if required.
• Farðu varlega: To prevent breaking the light or sound components, handle the sabers carefully at all times.
• Geymið á þurrum stað: To avoid moisture damage, keep the sabers in a cold, dry place.
• Skiptu um rafhlöður: As soon as the lights go out or the sound gets weak, change the three AAA batteries.
• Koma í veg fyrir áhrif: The internal electronics may be harmed if the swords are dropped or subjected to excessive force.
• Forðist að sökkva sér í vatn: Because the sabers are not waterproof, they should never be submerged in water.
• Leitaðu að lausum hlutum: To make sure everything is secure, periodically check the buttons and handle connections.
• Minimize Exposure to Extreme Temperatures: Avoid placing the sabers in extremely hot or cold environments as this may have an impact on the materials and battery performance.
• Notaðu aðeins rafhlöður sem mælt er með: To prevent harm to the internal parts of the sword, only use AAA batteries of the suggested kind.
• Forðastu skarpa hluti: To avoid unintentional scratches or punctures, keep sharp items away from the sabers.
• Reassemble After Play: To prevent losing any pieces, make sure the sabers are firmly reconnected if they are split apart.
• Geymið í upprunalegum umbúðum: To prevent dust and damage, store the sabers in their original packaging for extended periods of time.
• Test for Functionality Frequently: Make sure the lights and sound are functioning correctly by pressing the activation buttons on a regular basis.
• Skoðaðu fyrir slit: Check the sabers frequently for signs of wear or damage, especially in the areas surrounding the buttons and battery chambers.

VILLALEIT

Útgáfa	Lausn
The sword does not light up	Check that the batteries are properly installed and have sufficient charge.
Ljós flökta eða eru dauf	Skiptu um rafhlöður með nýjum AA rafhlöðum.
Sword feels hot	Ensure the batteries are not overcharged or left in for too long.
The sword is not turning on	Ensure the battery compartment is clean and the contacts are not corroded.
One side of the sword doesn’t light	Check for a loose connection or a damaged LED bulb on the non-functioning side.
The sword makes noise	Ensure there is no foreign object inside the sword.
Sword feels too light	Verify that the blade is securely attached and that there is no damage.
Ljósin slokkna of fljótt	Confirm that the batteries are new and installed correctly.
Sverðið kviknar með hléum	Inspect the switch for any loose connections or defects.
Ljósin eru of björt	Adjust the lighting effects or turn it off temporarily to avoid discomfort.
The sword flickers randomly	Check for faulty wiring inside the sword or replace the LED bulb.
Sword doesn’t activate automatically	Ensure the automatic mode is set and try restarting it.
Rafhlöðulokið lokar ekki	Ensure no debris is blocking the battery compartment and that the cover is aligned.
The sword produces a strange smell	This could indicate a battery issue; try replacing the batteries and checking for damage.
Rafhlöður tæmast of fljótt	Try using high-quality batteries that last longer or check for potential power issues.

kostir og gallar

Kostir:

1. Double-sided LED lights create an exciting visual effect.
2. Automatic operation makes it easy to use without manual effort.
3. Varanleg bygging tryggir langvarandi ánægju.
4. Perfect for nighttime play or themed events, like cosplay or parties.
5. The affordable price of $19.99 makes it a great value for an LED toy.

Gallar:

1. Requires 6 AA batteries, which need to be replaced regularly.
2. Light intensity may be too bright for sensitive users.
3. Hentar ekki til notkunar utandyra við erfiðar veðurskilyrði.
4. The sword is lightweight, so it may not feel substantial for some users.
5. Limited educational objective, focused mainly on visual effects.

ÁBYRGÐ

The Flashing Blinky Lights LED Double-Sided Sword comes with a 1 ára takmörkuð ábyrgð, covering any defects in material or workmanship. The warranty ensures that if your sword experiences issues due to manufacturing faults, it can be replaced or repaired. The warranty does not cover damage caused by misuse or accidental damage. Proof of purchase is required for all warranty claims. For further assistance, customers can contact Flashing Blinky Lights customer service.

Algengar spurningar

What is the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword is a fun, light-up toy sword featuring vibrant LED lights on both sides, ideal for play or themed events.

How much does the Flashing Blinky Lights LED Double-Sided Sword cost?

The Flashing Blinky Lights LED Double-Sided Sword is priced at $19.99, offering an affordable option for light-up toys.

What are the dimensions of the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword measures 26.8 x 1.4 x 1.3 inches, providing a full-sized sword for exciting play.

How many batteries are required for the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword requires 6 AA batteries to power the LED lights.

What is the power source for the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword is powered by 6 AA batteries (not included).

What operation mode does the Flashing Blinky Lights LED Double-Sided Sword use?

The Flashing Blinky Lights LED Double-Sided Sword operates in automatic mode, lighting up when in use.

What colors are available for the Flashing Blinky Lights LED Double-Sided Sword?

The product description does not specify color options, but typically, the Flashing Blinky Lights LED Double-Sided Sword features multicolor LED lights.

How long will the batteries last in the Flashing Blinky Lights LED Double-Sided Sword?

Battery life for the Flashing Blinky Lights LED Double-Sided Sword will vary depending on usage, but with 6 AA batteries, it should provide hours of light-up play before needing a replacement.

What type of batteries are required for the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword requires 6 AA batteries to power the LED lights.

How can I activate the lights on the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword features an automatic operation mode, so the lights turn on when the sword is in use.

What is the target audience for the Flashing Blinky Lights LED Double-Sided Sword?

The Flashing Blinky Lights LED Double-Sided Sword is designed for children and is ideal for fans of fantasy, action, and light-up toys.

What type of play is the Flashing Blinky Lights LED Double-Sided Sword best suited for?

The Flashing Blinky Lights LED Double-Sided Sword is ideal for action-themed play, fantasy role-playing, or as a costume accessory in a variety of settings.

Why isn't the LED light working on my Flashing Blinky Lights LED Double Sided Sword?

Ensure the batteries are installed correctly, with the positive and negative sides aligned. If the lights still don't work, try replacing the batteries with fresh ones to resolve any power issues.

The Flashing Blinky Lights LED Double Sided Sword is not turning on. What could be the problem?

Check if the on/off switch is in the correct position. If it’s still not turning on, inspect the battery compartment for any loose or corroded battery connections. Replace the batteries if necessary.

Why is the light flickering on my Flashing Blinky Lights LED Double Sided Sword?

Flickering may be caused by low battery power or a loose connection. Replace the batteries with fresh ones and check for any loose or damaged wiring inside the sword.

Heimildir

• Notendahandbók