Denon DP-450USB Semi-Automatic Analog Turntable Instruction Manual

Inngangur

This manual provides essential information for the proper setup, operation, and maintenance of your Denon DP-450USB Semi-Automatic Analog Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

1. Uppsetning

1.1 Upppakkning og auðkenning íhluta

Fjarlægið alla íhluti varlega úr umbúðunum. Gangið úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu til staðar:

• Plötusnúður Eining
• Rykhlíf
• USB snúru
• Rafmagns millistykki
• Fati
• Drive Belt (pre-installed or separate)
• Mótvægi
• Headshell with Cartridge (pre-mounted)
• 45 snúninga millistykki

1.2 Staðsetning

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

1.3 Uppsetning á diski og belti

1. Setjið diskinn varlega á miðjusnúninginn.
2. Locate the drive belt (if not pre-installed) and stretch it around the inner rim of the platter and over the motor pulley.

1.4 Uppsetning tónarma og hylkis

The DP-450USB typically comes with a pre-mounted cartridge. Follow these steps for tonearm balancing:

1. Fjarlægðu pennahlífina.
2. Opnaðu tónarminn úr hvíldinni.
3. Adjust the counterweight by rotating it until the tonearm is balanced and floats horizontally.
4. Set the tracking force according to the cartridge manufacturer's specifications (typically 1.8g for the included cartridge).
5. Adjust the anti-skating dial to match the tracking force setting.

1.5 Uppsetning rykhlífar

Attach the dust cover hinges to the designated slots on the rear of the turntable. The unique design allows the dust cover to double as a display stand for album covers.

Image: Denon DP-450USB with its removable dust cover positioned to display an album jacket.

1.6 Tenging við hljóðkerfi

The DP-450USB offers multiple connectivity options:

• Analog útgangur (RCA): Connect the RCA cables from the turntable's 'PHONO OUT' to your amplifier's phono input. If your amplifier lacks a phono input, use the built-in phono equalizer by setting the 'EQUALIZER' switch to 'ON'.
• USB úttak: Connect the USB cable to your computer for digitizing vinyl records.

Image: Rear panel of the Denon DP-450USB, highlighting the RCA audio outputs, ground terminal, USB-A port, and power input.

2. Notkunarleiðbeiningar

2.1 Kveikt/slökkt

To power on the turntable, rotate the power knob. The platter will begin to spin. To power off, rotate the knob to the 'OFF' position.

2.2 Að spila plötu

1. Settu disk á fatið.
2. Veldu viðeigandi hraða (33 1/3, 45 eða 78 snúningar á mínútu) með hraðavalsrofanum.
3. Press the 'START' button. The tonearm will automatically lift, move to the beginning of the record, and gently lower the stylus onto the groove.
4. At the end of the record, the tonearm will automatically lift and return to its rest, and the platter will stop spinning.

2.3 hraðaval

The DP-450USB supports three playback speeds: 33 1/3 RPM (for LPs), 45 RPM (for singles), and 78 RPM (for vintage shellac records). Use the selector switch to choose the correct speed for your record.

Mynd: Yfirborð view of the Denon DP-450USB turntable, displaying the platter, tonearm, and speed selection controls.

2.4 USB upptaka

To digitize your vinyl collection, connect the turntable to your computer via the USB-A port. Use compatible recording software (e.g., MusiCut for PC) to capture audio in MP3 or WAV formats.

2.5 Bluetooth Connectivity (if applicable)

While the DP-450USB model does not feature built-in Bluetooth, some variants of Denon turntables offer this functionality. If you have a Bluetooth-enabled Denon turntable, refer to its specific instructions for pairing with compatible devices.

3. Viðhald

3.1 Þrif á stíluspenna

Gently brush the stylus from back to front using a soft brush designed for stylus cleaning. Avoid touching the stylus with your fingers.

3.2 Þrif á snúningsdiski

Wipe the turntable chassis and platter with a soft, dry cloth. For stubborn marks, use a slightly damp klút og þerrið strax. Forðist slípiefni eða leysiefni.

3.3 Umhirða rykhlífar

Clean the dust cover with a soft, lint-free cloth. Use a mild, non-abrasive cleaner if necessary. Avoid harsh chemicals that can scratch or cloud the plastic.

4. Bilanagreining

• Ekkert hljóð: Check all cable connections (RCA, power). Ensure the phono equalizer switch is set correctly (ON if connecting to a line-level input, OFF if connecting to a phono input). Verify amplifier and speaker settings.
• Skipping or Distortion: Check if the record is clean and free of dust. Verify tonearm balance, tracking force, and anti-skating settings. Ensure the turntable is on a stable, level surface.
• Rangur hraði: Confirm the speed selector switch is set to the correct RPM for the record being played.
• USB Recording Issues: Ensure the USB cable is securely connected and your recording software is correctly configured to recognize the turntable as an audio input device.

For further assistance, please refer to the comprehensive troubleshooting guide on the Denon support websíðuna eða hafðu samband við þjónustuver.

5. Tæknilýsing

6. Ábyrgð og stuðningur

Your Denon DP-450USB turntable is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, service, or warranty claims, please visit the official Denon website or contact Denon customer service directly.