Notendahandbók fyrir DrayTek Vigor2925 tvöfalda Gigabit WAN leiðara

Inngangur

The DrayTek Vigor2925 Series is an advanced IPv6-ready dual WAN broadband security firewall router designed for small to medium businesses. This manual provides essential information for setting up, operating, and maintaining your Vigor2925 router, ensuring reliable and flexible broadband connectivity.

Helstu eiginleikar

• Support for both IPv6 and IPv4 networks.
• Dual Gigabit Ethernet WAN ports for failover and load-balancing capabilities.
• Up to 50 VPN tunnels with comprehensive secure protocols, including 25 SSL VPN options.
• Two USB 2.0 ports for 3G/4G mobile broadband, FTP server functionality, and network printer sharing.
• VLAN support for secure and efficient workgroup management.
• Integrated firewall with stateful packet inspection and Denial of Service (DoS) protection.

Líkamlegt yfirview

The front panel of the Vigor2925 router provides access to various ports and indicators for status monitoring and connectivity.

Figure 1: Front Panel of DrayTek Vigor2925 Router. This image displays the front panel of the DrayTek Vigor2925 router. From left to right, it features a 'Factory Reset' button, LED indicators for 'ACT' (Activity), 'WAN1', 'QoS' (Quality of Service), 'USB1', 'WAN2', 'WCF' (Web Content Filter), 'USB2', 'VPN', and 'DMZ' (Demilitarized Zone). Two USB ports are labeled 'USB'. Following these are two Gigabit Ethernet WAN ports labeled 'WAN1' and 'WAN2', and five Gigabit Ethernet LAN ports labeled 'LAN 1' through 'LAN 5'.

LED Vísar:

• ACT: System Activity Indicator.
• WAN1/WAN2: Status for Wide Area Network ports 1 and 2.
• QoS: Quality of Service status.
• USB1/USB2: Status for USB ports 1 and 2.
• WCF: Web Content Filter status.
• VPN: Virtual Private Network connection status.
• DMZ: Demilitarized Zone status.

Gáttir og hnappar:

• Factory Reset Button: Used to restore the router to its default factory settings.
• USB tengi (x2): For connecting 3G/4G USB modems, USB storage devices, or network printers.
• WAN1/WAN2 Ports (Gigabit Ethernet): Connect to your internet service provider's modem for primary and secondary internet connections.
• LAN1-LAN5 Ports (Gigabit Ethernet): Connect to local network devices such as computers, switches, or access points.

Uppsetningarleiðbeiningar

1. Vélbúnaðartenging:

1. Tengja WAN: Tengdu aðal internetmótaldið þitt við WAN1 port using an Ethernet cable. If you have a secondary internet connection, connect its modem to the WAN2 höfn.
2. Connect LAN: Connect your computer or a network switch to any of the LAN1-LAN5 tengi með Ethernet snúru.
3. Kveikt á: Connect the power adapter to the router's power input and then plug it into an electrical outlet. The router will begin its startup sequence.
4. USB tæki (valfrjálst): If using a 3G/4G USB modem, USB storage, or a USB printer, connect it to one of the USB hafnir.

2. Initial Configuration Access:

• Gakktu úr skugga um að tölvan þín sé stillt á að fá IP-tölu sjálfkrafa (DHCP).
• Opna a web browser and enter the default IP address of the router, typically 192.168.1.1, inn í veffangastikuna.
• Enter the default username and password (refer to the label on the router or the quick start guide for specific credentials).
• Follow the on-screen wizard for initial internet connection setup and basic network configuration.

Notkunarleiðbeiningar

Dual WAN Configuration:

The Vigor2925 supports dual WAN connections for enhanced reliability and bandwidth. You can configure these in the web viðmót undir WAN > General Setup.

• Álagsjöfnun: Distributes network traffic across both WAN connections to optimize bandwidth utilization.
• Bilun: Automatically switches to the secondary WAN connection if the primary connection fails, ensuring continuous internet access.

VPN (sýndar einkanet):

The router supports up to 50 VPN tunnels, including SSL VPN, for secure remote access and site-to-site connectivity. Configuration options are available under VPN and Remote Access.

• SSL VPN: Provides secure remote access for individual users via a web vafra.
• IPsec/PPTP/L2TP VPN: For site-to-site connections or traditional client-to-site VPNs.

USB forrit:

Utilize the two USB ports for various functionalities:

• 3G/4G LTE Mobile Broadband: Connect a compatible USB modem for mobile internet access, which can also serve as a backup WAN.
• FTP þjónn: Attach a USB storage device to create a simple FTP server for file sharing within your network or remotely.
• Network Printer: Connect a USB printer to make it accessible to all devices on your local network.

VLAN (sýndar staðarnet):

Configure VLANs to segment your network into multiple broadcast domains, enhancing security and network performance. This is managed under LAN > VLAN.

Eldveggur og öryggi:

The Vigor2925 includes robust security features:

• Stateful Packet Inspection (SPI): Monitors the state of active connections and makes decisions based on the context of the traffic.
• DoS vörn: Verndar gegn þjónustuneitunarárásum.
• Efnissía: Styður Web Content Filtering (WCF) to manage internet access.

Viðhald

Fastbúnaðaruppfærslur:

DrayTek regularly releases firmware updates to improve performance, add new features, and address security vulnerabilities. It is recommended to keep your router's firmware up to date.

• Visit the official DrayTek website for the latest firmware for your Vigor2925 model.
• Follow the instructions provided with the firmware download for a safe upgrade process. Typically found under System Maintenance > Firmware Upgrade í web viðmót.

Stillingar öryggisafrit:

Regularly back up your router's configuration settings. This allows for quick restoration in case of a factory reset or unexpected issues. This option is usually found under System Maintenance > Configuration Backup.

Úrræðaleit

• Enginn internetaðgangur:
  • Check if the WAN LED indicators are active.
  • Verify that your internet modem is working correctly.
  • Ensure WAN settings in the router's web interface are configured correctly by your ISP.
• Ekki er hægt að nálgast Web Tengi:
  • Ensure your computer is connected to a LAN port and its IP settings are set to DHCP.
  • Try pinging the router's default IP address (192.168.1.1).
  • Hreinsaðu skyndiminnið í vafranum þínum eða prófaðu annan vafra.
• Hæg netafköst:
  • Check for high CPU or memory usage in the router's system status.
  • Review QoS settings to ensure critical traffic is prioritized.
  • Gakktu úr skugga um að vélbúnaðarforritið sé uppfært.
• Endurstilla verksmiðju: If you encounter persistent issues or forget your login credentials, press and hold the 'Factory Reset' button for approximately 5-10 seconds while the router is powered on. This will restore all settings to their default values. Viðvörun: Þetta mun eyða öllum sérsniðnum stillingum þínum.

Tæknilýsing

Ábyrgð og stuðningur

For detailed warranty information, technical support, and additional resources, please refer to the official DrayTek website or contact your local DrayTek distributor.

Official DrayTek Websíða: www.draytek.com