IOGEAR Q1748 Console Extender with Keyboard and Mouse Support

Package Contents

• 1 x Wired HDMI Transmitter
• 1 x Wired HDMI Receiver
• 1 x USB-A to USB-A Cable
• 1 x 12V/1A Locking Power Adapter
• 4 x Mounting Ears
• 8 x Machine Screws
• 1 x User Manual
• 1 x Warranty Card

The Adopted Trademarks HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the U.S., and/or macOS is a trademark of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respætive owners. Reproduction in whole or in part without permission is prohibited.

System Requirements

Transmitter:

• 1 x HDMI Source up to 3840×2160
• 1 x HDMI Display (Optional)
• 1 x Ethernet Cable (Cat5e/6/6A) up to 230ft/70m
• 1 x USB-A port for Keyboard and Mouse Support
• 1 x Power source*

Receiver:

• 1 x HDMI Display
• 1 x Standard 3-button mouse
• 1 x Standard 104-key keyboard
• 1 x Power source*
• 1 x 12V/1A Power adapter included. Power-Over-Ethernet will share power to both units

The product requires the use of UTP connectors. Please connect in the direct interconnection method and do not cross-connect.

Product Overview -Transmitter

Transmitter

Front

Back

Side

Front of Transmitter

1. Service Port (Firmware update port via Micro-USB)
2. HDMI Out
   • a. HDMI signal loop output port, connected to HDMI display
3. HDMI In.
   • a. HDMI signal input port, connected to the HDMI source device.
     Back of Transmitter
4. CAT Out
   • a. RJ45 connector to the CAT In port on the receiver with CAT6/6a cable.
5. Link Signal Indicator (Green)
   • a. Light on: The Transmitter and Receiver have a good connection signal.
   • b. Light Flashing: The Transmitter and Receiver have a poor connection signal.
   • c. Light Off: Transmitter and Receiver are not connected.
6. Data Signal Indicator (Yellow)
   • a. Light On: There is an HDMI signal transmission with HDCP encryption.
   • b. Light Flashing: There is HDMI signal transmission without HDCP encryption.
   • c. Light Off: There is no HDMI transmission.
7. PC Connection
   • a. Connection to PC. The computer can be accessed and controlled remotely through the USB port of the receiver (KVM function).
8. Power Input DC 12V
   • a. DC 12V/1A Power input port*
     Note: The extender kit supports power over Ethernet. This means that either the transmitter or the receiver can be powered with the included power supply, and the other connected device does not need a power supply.
     Side of Transmitter
9. EDID DIP Switch
   Use the DIP switch to set EDID. (Switching to the upper end
   • a. indicates 1; switching to the lower end indicates 0.)
   • b. 11 – EDD information is copied from the display at the RX.
   • c. 10 – EDID is preset to 4K @60Hz 2.0CH.
   • d. 01 – EDID is preset to 1080p 2.0CH.
   • e. 00 – EDID information is copied from the HDMI OUT at the TX.

Product Overview – Receiver

Receiver

Front
Back

Front of Receiver

1. Service Port (Firmware update port via Micro-USB)
2. HDMI Out
   • a. HDMI signal loop output port, connected to HDMI display.
3. Left/Right Audio Out
   • a. Analog audio output port, used for de-embedding output.
     Back of Reciever
4. CAT IN
   • a. RJ45 connector to the CAT Out port on the transmitter with CAT6/6a cable.
5. Link Signal Indicator (Green)
   • a. Light on: The Transmitter and Receiver have a good connection signal.
   • b. Light Flashing: The Transmitter and Receiver have a poor connection signal.
   • c. Light Off: Transmitter and Receiver are not connected.
6. Data Signal Indicator (Yellow)
   • a. Light On: There is an HDMI signal transmission with HDCP encryption.
   • b. Light Flashing: There is HDMI signal transmission without HDCP encryption.
   • c. Light Off: There is no HDMI transmission.
7. Keyboard Port
   • a. Connect to the keyboard via USB.
8. Mouse Port
   • a. Connect to the mouse via USB.
9. Power Input DC 12V
   • a. DC 12V/IA Power input port*

Note: The extender kit supports power over ethemet. This means that either the transmitter or the receiver can be powered with the included power supply, and the other connected device does not need a power supply.

Hardware Installation

Receiver

1. Connect an HDMI cable from the HDMI “Out” on the rear of the receiver to an HDMI display.
2. Connect a 3.5mm cable from the LIR Audio port on the receiver if using the audio de-embedder (optional).
3. Connect an Ethernet (Cat 5e/6/6a) up to 230ft to the CAT In Port of the Receiver.
4. If using keyboard and mouse control, connect a standard USB keyboard and USB mouse to the USB ports on the front of the receiver.
5. Connect the included power adapter from the transmitter to a 120V source unless utilizing POE from the Transmitter.
   Transmitter
6. Connect the other end of the Ethernet cable used in step 3 to the CAT Out port of the Transmitter.
7. If using keyboard and mouse control, connect the included USB cable from the USB port on the front of the transmitter to the supported source device.
8. Connect the included power adapter from the transmitter to a 120V source unless utilizing POE from the receiver.
9. Connect an HDMI cable from the HDMI “Out” on the rear of the transmitter to a local HDMI display (Optional).
10. Connect the HDMI source device via an HDMI cable to the HDMI “In” Port on the rear of the transmitter.

Limited Warranty

Warranty Information

• This product carries a 1 Year Limited Warranty.
• For the terms and conditions of this warranty, please go to https://www.iogear.com/support/warranty
• Register online at https://www.iogear.com/register

Important Product Information

• Product Model
• Serial Number

FCC STATEMENT

Compliance Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CE Statement

• This device has been tested and found to comply with the following European
• Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC), and R&TTED (1999/5/EC).

Contact

• WE’RE HERE TO HELP YOU!
• NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

• Visit www.iogear.com for more product information
• Visit www.iogear.com/support for live help and product support

IOGEAR

• iogear.custhelp.com
• support@iogear.com
• www.iogear.com

Documents / Resources

IOGEAR Q1748 Console Extender with Keyboard and Mouse Support [pdf] User Guide Q1748 Console Extender with Keyboard and Mouse Support, Q1748, Console Extender with Keyboard and Mouse Support, with Keyboard and Mouse Support, and Mouse Support, Mouse Support

References

• User Manual