IOGEAR-logo

IOGEAR GUH3C4C 4 Port USB-C Hub

IOGEAR-GUH3C4C-4-Port-USB-C-Hub-product

Using Instructions

  • Connect up to 4 USB-C peripherals to USB-C ports 1-4, such as smartphones, tablets, SSDs, or other devices.
  • Optional: Connect a USB-C Power adapter to the USB-C port with a Power Delivery Pass-Through for up to 100W PD.
  • Connect your host laptop or computer.
  • Federal Communication Commission Interference Statement:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FAQ

  • Q: What is the maximum power delivery supported by the USB-C port with Power Delivery Pass-Through?
  • A: The USB-C port with Power Delivery Pass-Through supports up to 100W PD.
  • Q: How many USB peripherals can be connected to this concentrador?
  • A: You can connect up to 4 USB-C peripherals to this concentrator.
  • Q: Where can I register the product for warranty?
  • A: You can register online at www.iogear.com/register.

Package Contents

  • 1 x GUH3C4C
  • 1 x Quick Start Guide
  • 1 x Warranty Card

System Requirements

  • USB-C port (10 Gbps required for full bandwidth)
  • Windows® 8, Windows® 8.1, Windows® 10, Windows® 11
  • macOS® 10.13+

Overview

  • A. USB-C for Host connection (10 Gbps)
  • B. 3 x USB-C Ports for USB peripherals (Up to 10 Gbps)
  • C. 1 x USB-C Port for USB peripherals (Up to 10 Gbps) or up to 100W PD Passthrough

IOGEAR-GUH3C4C-4-Port-USB-C-Hub-fig-1

Hardware Installation

  1. Connect up to 4 USB-C peripherals to USB-C ports 1-4. Smartphone, tablet, SSD, or other devices.
  2. Connect the USB-C Power adapter to the USB-C port with a Power Delivery Pass-Through for up to 100W PD. (Optional).
  3. Connect your host laptop or computer.

IOGEAR-GUH3C4C-4-Port-USB-C-Hub-fig-2

FCC STATEMENT

Compliance Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital service, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Limited Warranty

Warranty Information

Important Product Information

  • Product Model ______________________
  • Serial Number ______________________

Contact

  • WE’RE HERE TO HELP YOU!
  • NEED ASSISTANCE SETTING UP THIS PRODUCT?
  • Make sure you:
  • Visit www.iogear.com for more product information
  • Visit www.iogear.com/support for live help and product support

IOGEAR

Documents / Resources

IOGEAR GUH3C4C 4 Port USB-C Hub [pdf] User Guide
GUH3C4C, GUH3C4C 4 Port USB-C Hub, 4 Port USB-C Hub, USB-C Hub, Hub

References

Leave a comment

Your email address will not be published. Required fields are marked *