INTRACOM K2213BW Wireless Keyboard
Specifications
- Model: K2213BW
- FCC Compliance: Part 15
- RF Exposure: General Requirement Met
Connecting
Connecting via 2.4 GHz Receiver:
- Insert the receiver
- Remove the wireless receiver located under the mouses battery cover
- Plug the receiver into an available USB port on your computer.
- Power the keyboard
- Insert two AAA battery into the keyboard’s battery compartment.
- Press the 2.4G button to switch to 2.4G mode (the indicator light with turn red).
- Power the mouse
- Insert one AA battery into the mouse’s battery compartment.
- Press the switch button at the bottom of the mouse to switch to 2.4G mode (the indicator light with turn white).
Keyboard function keys
The frequency band used by this product is 2402 – 2480 MHz. The maximum emitted transmission power is 0.0123 mW E.I.R.P. This device complies with the requirements of CE RED 2014/53/EU. The Declaration of Conformity for is available at:
Important: Read before use.
Warning: This device complies with Part 15 of the FCC Rules.?
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.?These limits are designed to provide reasonable protection against harmful interference in a residential installation.?This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement.
CONTACT INFORMATION
- support.manhattanproducts.com/barcode/180764
- North & South America
- IC Intracom Americas
- 550 Commerce Blvd.
- Oldsmar, FL 34677, USA
- Asia & Africa
- IC Intracom Asia
- 4-F, No. 77, Sec. 1, Xintai 5th Rd.
- Xizhi Dist., New Taipei City 221, Taiwan
- Europe
- IC Intracom Europe
- Löhbacher Str. 7
- D-58553 Halver, Germany
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries.
For additional benefits:
- Scan to register your product warranty
- or go to: register.manhattanproducts.com/r/180764.
- For specifications, please visit manhattanproducts.com.
- Printed on recycled paper.
FAQs
- Q: What should I do if the device causes interference?
- A: If the device causes interference, try relocating it to a different position. Ensure it is not placed near other electronic devices that may be causing the interference.
- Q: Can I modify the device?
- A: Any modifications to the device that are not approved may void your authority to operate the equipment. Please refrain from making unauthorized changes.
Documents / Resources
 |
INTRACOM K2213BW Wireless Keyboard [pdf] Instructions K2213BW, K2213BW Wireless Keyboard, Wireless Keyboard, Keyboard |