INTOLED Garden Post with Socket
Step-by-Step Instruction
Step 1: Power Off
Ensure the power is turned off by switching the main switch to the “OFF” position.
Step 2: Position the Outlet Post
Place the outlet post in the desired location, ensuring it is upright and stable.
Step 3: Secure the Base
Drill holes into the ground and insert anchors to secure the base of the outlet post.
Step 4: Connect the Wiring
Feed the electrical wiring through the base of the outlet post.
Step 5: Connect the Water Supply
- Attach the water supply hose to the outlet post.
- Ensure the connection is tight and secure.
- Check for any leaks.
Step 6: Finalize Installation
Use a screwdriver to tighten all screws and secure the outlet post in place.
Step 7: Power On
Switch the main switch to the “ON” position to restore power.
Specifications
| Feature | Details |
|---|---|
| Power Supply | Standard Electrical Connection |
| Water Connection | Standard Hose Fitting |
| Installation Tools | Drill, Screwdriver |
FAQs
- What tools are needed for installation?
You will need a drill and a screwdriver for installation. - Can this be installed outdoors?
Yes, the outlet post is designed for outdoor use. - Is it necessary to turn off the power before installation?
Yes, always ensure the power is off before starting the installation.
Documents / Resources
 |
INTOLED Garden Post with Socket [pdf] Instructions 10mm, 341, Garden Post with Socket, Post with Socket, with Socket, Socket |