FCC-500 RGB Dual Function Controller/Slave
Instruction Manual
Model: FCC-500
RGB Dual Function Controller/Slave
- Input Power: 12V/24V
- Max Output: 300W
- Built-in Modes: 33 Modes with Speed Control
– Modes 01-25 RGB
– Modes 26-33 BangBang
– Mode 00 Slave/Amplier (Requires connection of communication ports)
Wiring
Initial Setting
- After connecting power, open the cover and set to the desired mode before connecting modules.
- If the speed is set too low there could be a timing gap between the board indicator and modules. Reboot the controller to reset.
Controller Interface
| Solid Color | Flashing | Dimming | Multi-Color |
| 01 .Red 02 .Green 03. Blue 04 .Yellow 05 .Pink 06 .Sky Blue 07. White |
08. Red 09 .Green 10 . Blue 11. Yellow 12 .Pink 13. Sky Blue 14. White |
15 .Red 16. Green 17 .Blue 18 . Yellow 19 .Pink 20 . Sky Blue 21 . White |
22. 7 Color Dimming 23. 7 Color Changing 24. 7 Color Transition 25. 7 Color Flashing 00. Slave (Amplifier) Mode |
Bang Bang Modes 26∼35
949-514-8253
sales@interoneusa.com
www.interoneusa.com
Documents / Resources
 |
INTERONE FCC-500 RGB Dual Function Controller/Slave [pdf] Instruction Manual FCC-500, RGB Dual Function Controller, RGB Dual Function Slave |
