INTERLIGHT IL-D29DALI2 One4all Driver Installation Guide
Overview
0-10V 10V PWM
Read this manual carefully and keep it for future use.
Specifications
| OUTPUT | Dimming range | DALI 1%-100%; Push-DIM 2%- 100%, 0-10V: 10%-100% |
| Flicker percentage | <3% | |
| INPUT | AC Voltage range | 200-240VAC |
| Frequency range | 47 ~ 63Hz | |
| Power factor | >0.95 at full power | |
| Environment | Working Temp. | -20°C ~45°C |
| Storage temp., humidity | -40°C ~80°C | |
| Connection | Warranty years | 5 |
| Lifespan (hrs) @ ta=25°C | 50000H | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386- 102: 2014, IEC 62386-207: 2009, DALI-2 | |
| Dimension L x W x H | 125X76X30mm |
Wiring Diagram
DALI
0-10V / 10V PWM
PUSH
Use the dip switches to set the desired output that matches the luminary.
IL-D29DALI2 (standard 250 mA)
| DIP S.W | 1 | 2 | 3 | 4 | 5 |
| 250mA | – | – | – | – | – |
| 300mA | ON | – | – | – | – |
| 350mA | – | ON | – | – | |
| 400mA | ON | ON | – | – | – |
| 450mA | – | – | ON | – | – |
| 500mA | ON | – | ON | – | – |
| 550mA | – | ON | ON | – | – |
| 600mA | ON | ON | ON | – | – |
General information
- IP 20, only for indoor use.
- Beware of electric shocks.
- Shut off the power for installation and maintenance.
- This product may only be installed by a recognized installer.
- The luminaire and the driver must not be covered with heat-insulating material.
Symbols
Documents / Resources
 |
INTERLIGHT IL-D29DALI2 One4all Driver [pdf] Installation Guide IL-D29DALI2, C350-421100DBF |
