Intercomp WC3-D Auto Dispense Instructions

Start Auto Dispense

1. Make sure Toggle switch is set to Auto
2. Press UNLOAD
3. Most recent target weight is displayed. Default is 100 lbs.
4. If correct target weight is displayed press enter.
   a. If you need to change target weight enter in new weight with numeric keypad and press ENTER
5. PREACT IS BRIEFLY DISPLAYED before showing the most RECENT PREACT setting (DEFAULT IS 20 lbs.)
   a. If correct PREACT IS DISPLAYED PRESS ENTER
   b. If you need to change target weight enter in new weight with numeric keypad and press ENTER

Documents / Resources

Intercomp WC3-D Auto Dispense [pdf] Instructions WC3-D Auto Dispense, WC3-D, Auto Dispense, Dispense

References

• User Manual