Cue Server 3 Core (CS-3110)
Quick Start Guide
Hardware Overview
What’s in the Box
- CS-3110 Cue Server 3 Core Processor
- Power Supply
Startup Procedure
 |
• Connect Cue Server to the Network Use an Ethernet patch cable to connect Cue Server to your Ethernet Switch or directly to your computer. |
 |
• Connect Cue Server to Power Use the included Power Supply with Cue Server. |
 |
• Open Cue Server Studio on your Computer You can download Cue Server Studio from cueserver.com. |
 |
• Cue Server should appear in the Navigator Window Cue Server Studio’s main Navigator Window searches for and displays all Cue Servers found on the network. |
What’s Next
• Visit our Website for More
Our website contains more information, including User’s Manual, Downloads, Guides, Examples, Training and more. You can start your Cue Server journey at: cueserver.com
Interactive Technologies, Inc.
5295 Lake Pointe Center Drive
Cumming, GA 30041 USA
1-678-455-9019
interactive-online.com
Specifications subject to change without notice.
Interactive Technologies is not responsible for errors or omissions.
All trademarks are the property of their respective
owners. Copyright © 2022-23,
Interactive Technologies, Inc.
All rights reserved worldwide.
D0551A 1/16/2023
Documents / Resources
 |
Interactive CS-3110 CueServer 3 Core DMX Lighting Control Unit [pdf] User Guide CS-3110 CueServer 3 Core DMX Lighting Control Unit, CS-3110, CueServer 3 Core DMX Lighting Control Unit, 3 Core DMX Lighting Control Unit, Lighting Control Unit, Control Unit |