Made in America
Lifetime Guarantee
Thank you for purchasing this instrument from Intellitronix. We value our customers!
INSTALLATION GUIDE
LED Bargraph Voltmeter Gauge
Part Number: BG9015
* Always disconnect the battery before attempting any electrical work on your vehicle.*
DESCRIPTION AND FEATURES
The Intellitronix Bargraph LED voltmeter is compatible with any vehicle. The microprocessor provides accurate readings from12v-16v.
WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer.
Ground – Black Connect directly to the engine block.
Power – Red Connect to a switched +12V source, such as the ignition.
Dimmer – Purple Connect to the parking lights to dim the LEDs 50% when the headlights are on. However, do not connect to the headlight rheostat control wire; the dimming feature will not work properly. If you don’t want your display to dim with the headlights, connect the wire to an engine ground.
Documents / Resources
 |
Intellitronix BS9015B LED Analog Bargraph Voltmeter [pdf] Installation Guide BS9015B LED Analog Bargraph Voltmeter, BS9015B, LED Analog Bargraph Voltmeter, Analog Bargraph Voltmeter, Bargraph Voltmeter, Voltmeter |