Intellitec 01141 Capacitive Touch Keypads
Product Usage Instructions
- Momentary input buttons are used for controlling specific functions like slideouts and awnings.
- Follow these steps to use the momentary input button:
- Press and hold the button to activate the function.
- The button’s backlight will illuminate while it is being held down.
- Release the button to deactivate the function. The backlight will turn off.
- To adjust the brightness of dimmable outputs, follow these steps:
- Locate the dimmable output controls on the keypad.
- Press the designated buttons to increase or decrease the brightness levels.
- Release the button once the desired brightness is achieved.
FAQ
- Q: Where can I find additional product literature and guides?
- A: Additional product literature and guides can be found on the manufacturer’s website or by contacting Intellitec Products, LLC directly.
- Q: How can I reach customer support for further assistance?
- A: For customer support or further assistance, you can visit www.intellitec.com or contact Intellitec Products, LLC at 386-738-7307.
Capacitive Touch Keypads (Road Commander)
Part number
- 00-01137-000
- 00-01138-000
- 00-01140-000
- 00-01141-000
Description
- This document is a guide for users that provides the necessary information for interacting with the Capacitive Touch Keypads.
- This document includes a description of the device’s functionality and will expand upon the features of the device.
- The Capacitive Touch Keypads provide a customizable solution for networked buttons.
- Each input button on the device can be configured to be one of several different functionalities.
- The device gets feedback from other Road Commander devices on the network to determine which button backlights should be on and which should be off.
Operating Capacitive Touch Keypads
Momentary Input Button
- Momentary input buttons are classified as buttons that need to be continuously held down for them to operate as expected.
- Examples of these are buttons that are used to control slideouts and awnings.
- While the button is being held down, the button’s backlight will illuminate.
- Once the button is released, the backlight will turn off.
Latching Input Button
- Latching input buttons are classifed as buttons that only need to be tapped a single time for them to perform their designated action.
- Examples of these are buttons that are used to turn on lights, pumps, or disconnects.
- These types of input buttons will illuminate when being pressed and then return to the original backlight state for a brief moment.
- During this time, the Capacitive Touch Keypad is waiting for a status message from the device it is controlling to confirm what state it is in.
- Once, the message is received, the input button illumination status will be updated accordingly.
Adjusting Brightness of Dimmable Outputs
- Some devices connected to the Road Commander network might be configured as dimmable devices.
- To be able to control the brightness of these devices, ensure that the keypad has configured that output as dimmable.
- Once an input’s dimmable status has been confirmed, the output can be dimmed when it is in the ON position.
- Holding down the input button with the output on will change the dimming value by 10% every second.
- If the dimming value reaches the minimum of 10% and the input button is still being held down, the brightness will begin to increase.
- If the dimming value reaches the maximum 100% and the input button is still being held down, the brightness will begin to decrease.
Available Product Literature and Guides
- Brochure: 53-01137-000
- Product Specification: 53-01137-001
- User’s Guide: 53-01137-100
- Integrator Guide: 53-01137-300
Contact Information
- www.intellitec.com
- Intellitec Products, LLC 1485 Jacobs Road, DeLand, Florida, USA 32724
- 386-738-7307. sales@intellitec.com
Documents / Resources
 |
Intellitec 01141 Capacitive Touch Keypads [pdf] User Guide 00-01137-000, 00-01138-000, 00-01140-000, 00-01141-000, 01141 Capacitive Touch Keypads, 01141, Capacitive Touch Keypads, Touch Keypads, Keypads |