Integral LED WT5 LED Controller User Manual

Integral LED WT5 LED Controller

WT5  WiFi & RF 5 inl LED Controller

• 5 in 1 function, used for controlling RGB, RGBW, RGB+CCT, color temperature or single-color LED strip.
• DC power socket input and 5-channel constant voltage output.
• Tuya smart APP cloud control, supports on/off, RGB color, color temperature and brightness adjustment, delay turn on/off light, timer run, scene edit and music play function.
• Voice control, support for Amazon Alexa, Google Assistant, Tmall Genie and Xiaodu voice assistant.
• Match with optional RF 2.4 G remote control.
• User need set the light type by press key before Tuya smart APP network connection and match RF remote of the same light type.
• Each WT5 controller can also work as a WiFi-RF converter, then use Tuya Smart app to control one or more RF LED controllers or RF LED dimming drivers synchronously.
• Light on/off fade time 3s selectable.

Technical Parameters

Mechanical Structures and Installations

System Wiring

Wiring Diagram

For RGB+CCT

Press and hold match/set key for 16s, until the RUN LED indicator turn blue, then release, the controller will become RGB+CCT type, then do smart con?g by Tuya smart APP, or short press match key to match with RGB+CCT RF remote

For RGBW

Press and hold match/set key for 14s, until the RUN LED indicator turn green, then release, the controller will become RGBW type, then do smart con?g by Tuya smart APP, or short press the match key to match with the RGBW RF remote.

For RGB

Press and hold match/set key for 12s, until the RUN LED indicator turn red, then release, the controller will become RGB type, then do smart con?g by Tuya smart APP, or short press match key to match with RGB RF remote.

For dual color CCT

Press and hold match/set key for 10s, until the RUN LED indicator turn yellow, then release, the controller will become CCT type, then do smart con?g by Tuya smart APP, or short press match key to match with CCT RF remote.

For single color

Press and hold match/set key for 8s, until the RUN LED indicator turn white, then release, the controller will become DIM type, then do smart con?g by Tuya smart APP, or short press match key to match with dimming RF remote.

Note: 

1. User can connect constant voltage power supply or power adapter as power input.
2. Press and hold Match/Set key for 2s, switch 5 kinds light type in sequence.
3. For RGB+CCT or CCT light type, continuous power on and off will change 3 levels color temperature (WW, NW and CW) in sequence.
4. Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.

Tuya Smart APP Network Connection

Download and open APP

• Search for “Tuya Smart/Smart Life APP” in the app store, or scan the QR code on the right to download the APP. Register and login after installation.

APP Pairing Network

• Push twice Match/Set key fastly, or when press and hold Match/Set key for 8-16s to set 5 kinds light type: Clear previous network connection, enter WiFi config mode, the LED indicator flash fastly, the output LED will flash 10 times.
• Press and hold Match/Set key for 2s:
• Switch 5 kinds light type in sequence, notice this operation does not automatically clear previous network connection.
• Press and hold Match/Set key for 5s:
• Clear previous network connection, enter WiFi config mode, the LED indicator flash fastly.
• Repeat power on and off for 5 consecutive times, also clear previous network connection, enter WiFi config mode, the output LED will flash 10 times.
• If Tuya Smart APP network connection succeed, the RUN LED indicator will stop flash, and turn corresponding light type color (White: DIM, Yellow: CCT, Red: RGB, Green: RGBW, Blue: RGB+CCT). and in Tuya Smart APP, you can find RGB+CCT device (or other DIM, CCT, RGB or RGBW).
• When controlling the light with Tuya Smart/Smart Life APP, if the network connection is poor,
• you can control the light with Bluetooth connection within the Bluetooth control range.
• Note: The light can not be directly controlled by Bluetooth without WiFi configuration.

Tuya Smart APP Interface

• White interface

For DIM type:

• Touch the brightness slide to adjust brightness.

For RGB type:

• Touch brightness slide, get RGB mixed white firstly, then to adjust white brightness.

For RGBW type:

• Touch the brightness slide, adjust white channel brightness.
• Colour interface

For RGB or RGBW type:

• Touch color wheel to adjust static RGB color. Touch brightness slide to adjust color brightness. Touch saturation slide to adjust color saturation, namely gradient from the current color to white (RGB mixed).

For RGB+CCT type:

• Touch color wheel to adjust static RGB color, WW/CW will turn off automatically.
• Touch the brightness slide to adjust color brightness. Touch saturation slide to adjust color saturation, namely gradient from the current color to white (RGB mixed).
• Color temperature interface

For CCT type:

• Touch color wheel to adjust color temperature. Touch brightness slide to adjust brightness.

For RGB+CCT type:

• Touch color wheel to adjust color temperature; RGB will turn off automatically.
• Touch brightness slide to adjust white brightness.

Music, Timer, Schedule

• The music play can use smart phone music player or micro-phone as music signal input.
• The Timer key can turn on or turn off light in the next 24 hours.
• The Schedule key can add multiple timers to turn on or turn off light according to different time periods.

Scene interface

• The 1-4 scene is static color for all light type. the inner color of these scene can be editable.
• The 5-8 scene is dynamic mode for RGB, RGBW, RGB+CCT type, such as green fade in and fade out, RGB jump, 6 color jump, 6 color smooth.

WT5 Match Remote Control

End user can choose the suitable match/delete ways. Two options are offered for selection:

• Use the WT5’s Match key
• Match: Short press match key of WT5,  immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.
• The LED indicator fast flash a few times means match is successful.

Delete:

• Press and hold match key of WT5 for 20s,
• The LED indicator fast flash a few times means all matched remotes were deleted.

Dynamic Mode List

Installation Precautions

1. The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect lifespan of the products due to poor heat dissipation.
2. The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid radiation interference of the switching power supply.
3. The installation height shall be ≥ 1m from the ?oor to avoid shortening the remote control distance due to too weak reception signal.
4. The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remotedistance.
5. Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.