InstaVision JS-K500 Smart IP Camera User Manual

JS-K500 Smart IP Camera

Specifications

  • Device Type: InstaVision Smart IP Camera
  • Compatibility: Apple Store, Google Play Store
  • Network Support: 2.4GHz Wi-Fi
  • Regulatory Compliance: FCC Part 15
  • Radiation Exposure Limits: FCC Compliant

Product Usage Instructions

1. Download and Install the App

Download and install the InstaVision app by scanning the QR code
provided for the Apple Store or Google Play Store.

2. Account Registration

Open the app and either register a new account or log in to an
existing account.

3. Add Camera

Navigate to the Home Page within the app and select Add Camera.
Scan the QR code on the device to add the camera to your
account.

4. Connect to Wi-Fi

Follow the on-screen instructions to enter your Wi-Fi network
information. Note that only 2.4GHz networks are supported. Scan the
QR code with the camera lens to connect it to the Wi-Fi
network.

5. Naming Your Camera

Name your camera for easy identification once the setup is
complete.

6. Live View

After completing the initial setup, you will see the live view
of the camera on the main interface of the app.

FAQ

Q: What should I do if I encounter interference with my
camera’s operation?

A: Ensure that your camera is connected to a 2.4GHz Wi-Fi
network and maintain a minimum distance of 20cm between the
camera’s radiator and your body to comply with FCC regulations.

InstaVision Smart IP Camera User Manual

Introduction
Welcome to the instaVision Camera App. This manual will guide you through the various features of the app to ensure you get the most out of your security camera.
Installation and Setup
1. Download and Install: Download and install the InstaVision app by scanning the QR code for the Apple Store or Google Play Store.

2.Account Registration: Open the app.

2. Account Registration: Register a new account or log in to an existing account.

3.Add Camera: Navigate to the Home Page within the app.

3. Add Camera: Locate and select “Add Camera,” then scan the QR code on the device.

4.Connect to Wi-Fi: Follow the on-screen instructions to enter Wi-Fi network info. Please note that only 2.4GHz networks are supported.

5. Connect your camera to the Wi-Fi network by scanning the QR code in the app with the camera lens.

6.Name your camera before everything is set up.

7. See Live view: After compieting the initiai setup, you wili see the live viewof the camera on the main interface.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Documents / Resources

InstaVision JS-K500 Smart IP Camera [pdf] User Manual
2AW24-JS-K500, 2AW24JSK500, JS-K500 Smart IP Camera, JS-K500, Smart IP Camera, IP Camera, Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *