QUICK SETUP GUIDE
Glass Screen Protector
- Screen protector
- Wet cloth
- Alignment tool
- Dry cloth
- Polishing cloth
- Dust removal adhesive
- Quick Setup Guide
- Impact resistant glass
- Crystal clear screen without bubbles
- Simple installation with alignment tool
- Compatible with most cases
ATTACHING YOUR SCREEN PROTECTOR
- Remove your phone case (if needed).
- To prevent bubbles, clean your phone screen with the wet cloth, then remove moisture with the dry cloth.
- Press the dust removal adhesive to your phone’s screen repeatedly to clean any remaining debris.
- Push the alignment tool onto your phone until it snaps into place.
- Use tab #1 to peel the back film off the screen protector, then discard the film.
- Align the top of the screen protector with the alignment tool, then press it down from top to bottom to adhere.
- Remove the alignment tool.
- If there are bubbles, press them out toward edges of the screen protector.
- Reattach your phone case (if needed), then remove fingerprints with the polishing cloth.
LIFETIME LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
INSIGNIA Glass Screen Protector Quick Setup Guide – Download