inphic A9 Explorer Mouse

KEY DESCRIPTION

Tip: Press the middle DPI Key to adjust the DPI .

Mode

1. Take out the receiver
2. Plug the receiver into the interface of the device
3. Turn the bottom switch to 2.4G.

BT Mode

1. First Bluetooth Connection: Set the mode switch to BT, and within 2 minutes, operate the computer to connect the mouse via Bluetooth. For mice that have already been connected to a computer, when using again, set the switch to BT, and it will automatically reconnect.
   
2. Bluetooth Re-pairing: In Bluetooth mode, press and hold the pairing button at the bottom until the indicator light flashes quickly. The mouse will then enter Bluetooth pairing mode again and can connect to a new device.
3. BT Mode Compatibility: BT mode is not supported on WIN7 and earlier systems. For WIN7 or earlier systems, use 2.4G mode .
   

Package Contents

HOW TO USE

1. Connection Method 2.4G Mode:
   1. Take out the receiver from the bottom of the mouse.
   2. Plug the receiver into the device’s USB port.
   3. Set the bottom switch of the mouse to 2.4G.
      BT Mode:
      First Bluetooth Connection: Set the mode switch to BT, and within 2 minutes, operate the computer to connect the mouse via Bluetooth. For mice that have already been connected to a computer, when using again, set the switch to BT, and it will automatically reconnect.
2. Bluetooth Re-pairing: In Bluetooth mode, press and hold the pairing button at the bottom until the indicator light flashes quickly. The mouse will then enter Bluetooth pairing mode again and can connect to a new device. ($) BT Mode Compatibility: BT mode is not supported on WIN7 and earlier systems. For WIN7 or earlier systems, use 2.4G mode.
3. Low Battery Warning: When the voltage drops below 3.3V, the mouse enters low-power mode, and a white battery indicator light will flash. The power will automatically turn off when the voltage reaches 3.0V.
4. Bluetooth Pairing Time: Bluetooth pairing occurs within 2 minutes, and reconnection happens within 5 seconds.
5. Mouse Sleep Mode: The mouse will enter shallow sleep after being idle for 0.5 to 10 minutes. You can wake it up by moving the mouse or pressing a button. After  10 minutes of inactivity, the mouse will enter deep sleep and can only be awakened by pressing a button. Supported Systems for Bluetooth Mouse 5.0 Version: WIN8/WlN10, macOS, Android (version 5.04 and above), iOS (version 13.0 and above).

TECHNICAL PARAMETERS

• Model number: A9 Explorer
• Connection method: 2.4G/BT
• Wireless operating distance: Up to 10m if without any interference
• Built-in battery voltage: 3.7 V
• Rated input: 5V 500mA
• Tracking System: Optical tracking
• (BT mode is not supported on WIN7 and earlier systems. For WIN7 or earlier systems, use 2.4G mode or wired mode.)

WARRANTY POLICY

Dear User
Thank you for choosing INPHIC. Our warranty includes unconditional refunds within 45 days and free replacements within 12 months. To protect your rights and for better customer service, please note our warranty rules.

The following warranty exclusions:

1. Non-NPHIC products.
2. Unauthorized repair, misuse, negligence, abuse, modification, or tampering.
3. Expired warranty.
4. Damage due to force majeure.
5. Improper storage leading to damage.
6. The warranty void if the product remains uncharged for six months, potentially affecting performance.
7.  Malfunctions resulting from human error are not covered.

NOTES

1. Please find the USB receiver at the bottom of the mouse (not individually packed).
2. For optimal battery lifespan and safety, we recommend charging the mouse using a computer USB port.
3. If the mouse cannot connect to the device, please:
   1. Reconnect the mouse.
   2. Charge the mouse promptly for at least two hours or until fully charged before use.
4. If the mouse cursor is lagging, not sensitive, unable to move, or moving uncontrollably, please:  Check for foreign objects in the lens hole at the bottom of the mouse.
   1. Remove the blue film from the bottom.
   2. Use a mouse pad.
   3. Check if the DPI is set too low.
   4. Charge the mouse promptly.

• Normal operating environment: 0 C -40 C , 40%-85%RH.
• Do not immerse the product in any liquid or expose it to hot/humid environments.
• If the product is exposed to temperatures outside the specified range, immediately turn off the power switch (unplug the USB cable for wired mouse) until the temperature stabilizes within the specified operating range.
• Do not charge rechargeable products in hot/humid environments. Ensure that the charging cable, keyboard, mouse, and USB ports are dry and free of debris during charging.
• If the product’s connection cable or charging cable is damaged in any way, stop using it immediately.
• This product contains no user-serviceable parts. If the product does not function properly, please contact customer service.
• Do not attempt to modify or repair the product yourself, as this will void the warranty.
• If rechargeable products are not used for a long period, fully charge them first, tum off the power switch, and store them in a cool, dry place. Charge the product every three months to prevent damage to the battery from long periods without power.

WARNING

1. The product contains small parts. Do not let children use this product unsupervised.
2. Please do not discard this product carelessly. Dispose of it according to electronic product recycling regulations.

www.inphic.com 

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Frequently Asked Questions

• Q: What should I do if the mouse stops working?
  A: Check the batteries in the mouse and replace them if necessary. Also, ensure that the USB receiver is properly connected to the computer.
• Q: Can I use this mouse with a Mac computer?
  A: Yes, this mouse is compatible with Mac computers. Ensure that  you have the appropriate drivers installed for optimal performance.

Documents / Resources

inphic A9 Explorer Mouse [pdf] User Manual 2ANT9-A9EXPLORER, 2ANT9A9EXPLORER, a9explorer, A9 Explorer Mouse, A9, Explorer Mouse, Mouse

References

• User Manual