TOGGLE ROOMS XT 3 Host Switcher For USB
“
Specifications:
- Device Configuration: INOGENI MAESTRO device controller
- Technology: LINK
- Range: Medium
- Laptop Hub:
- USB-C Connector (Host #1)
- USB Connector (Host #2)
- HDMI Input Connector (Host #2)
- HDMI Output Connector
- USB Devices Connectors
- LINK Connector
- GPI Connector
- Power Connector
- HDBaseT 3.0:
- Up to 40 m (132 ft) when using 4Kp60
- Up to 70 m (230 ft) when using 1080p60
Product Usage Instructions:
Overview:
The TOGGLE ROOMS XT is a 3 host switcher for USB/HDMI devices
with an extension, allowing you to switch peripherals between 3
hosts using a single USB-C cable.
Setup:
- Connect the TOGGLE ROOMS XT to your Room PC hub and Laptop
hub. - Use the provided USB-C cable to establish connections between
devices. - Ensure all devices are powered on and connected to the
appropriate ports.
Switching Peripherals:
You can switch up to 5 peripherals between 3 hosts by pressing
the designated switch buttons. This flexibility is ideal for
various settings like huddle rooms, boardrooms, classrooms, and
auditoriums.
Extension Capabilities:
The device supports HDBaseT technology for extending signals up
to 70m @ 4K30 or 40m @ 4K60, providing seamless connectivity even
across large rooms.
FAQ:
Q: How many hosts can be connected to the TOGGLE ROOMS XT?
A: The TOGGLE ROOMS XT supports connection to 3 hosts
simultaneously.
Q: What type of cable extension is supported by the
device?
A: The device supports CAT6A cable extension up to 70m (230 ft)
for reliable signal transmission.
“`
TOGGLE ROOMS XT
3 HOST SWITCHER FOR USB/HDMI DE VICES WITH AN EX TENSION
DEVICE CONNECTORS Room PC hub
Laptop hub
OVERVIEW
One USB-C cable (100W) to take control of your large room
4K BYOD/BYOM FOR LARGE ROOMS: 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION
Switch 5 peripherals between 3 hosts:
· Automatic or manual switching between Room PC hub and Laptop hub (3 hosts capable)
· Direct connection of 5x USB devices + 1 HDMI display
· Flexible laptop connectivity: USB-C (100W) or USB-B + HDMI
· 2 box system: At the display (Room PC hub) and at the table (Laptop hub) · Connected with a single CAT6A cable · Uncompressed video signal via HDBaseT proven technology · Reach: 40 m/132 ft. at 4K60 and 70 m/230 ft. at 1080p
· 1 display: 4K60/16:9 and 5K30/21:9 widescreen (HDMI)
· Compatible by design: Crestron, Logitech, Lenovo, Poly, MAXHUB, Jabra, Teams, Zoom, etc.
· Perfectly compatible with Logitech UC cameras and CODECs · Logitech-tested compatible cameras: Rally and Rally Bar series, MeetUp, MeetUp 2, Scribe, and consumer cameras · Logitech UC CODECs: Rally Bar and Rally Bar series (Appliance Mode), Roommate, for MTR and Zoom Rooms
· USB 3.2 Gen 1/USB 3.1 Gen 1, backward-compatible with USB 3.0/2.0
· IP, RS-232 and GPI control · Optional host switch button: Table surface-mounted
button for BYOM laptop selection · Designed and manufactured in Canada · TAA-compliant
WHAT’S IN THE BOX
· 1x TOGGLE ROOMS XT ROOM PC device · 1x TOGGLE ROOMS XT LAPTOP device · 1x USB-C to USB-C cable 1.8 m/6 ft. · 1x USB 3.0 cable (USB-A to USB-B) 1 m/3 ft. · 3x terminal block 4-pos · 4x mounting brackets · 8x M2.5 mounting screws for brackets on product · 8x screws for TOGGLE ROOMS XT devices for table/wall
mount · 1x power supply 85-264VAC 50/60Hz to 24V/6.67A DC
for a LAPTOP hub · 1x power supply 85-264VAC 50/60Hz to 24V/1.5A DC for
a ROOM PC hub · 2x international adapters included in the box (USA/CA or
EU/UK/AU/BIS) · 1x Quick Start Guide/Thank You card · 4x PSU mounting bracket · 8x screws for PSU table/wall mount · 8x rubber feet
TOGGLE ROOMS XT — 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION
HOW DOES IT WORK?
Switch up to 5 peripherals between 3 hosts (5 USB + 1 display):
This flexibility extends across various settings, from huddle rooms to large boardrooms, classrooms, and auditoriums, making it an ideal solution for unified videoconferences.
FEATURED CONNECTORS
Switch button Laptop hosts the meeting
Power and charging status
Switch button Laptop hosts the meeting
Power
HDBaseT: CAT6A extension of up to 70 m @ 4K30, 40 m @ 4K60
24V power supply
GPI/button interface
Touch panel with optional HDMI ingest
2x USB 2.0
24V power supply
USB-C
USB HDMI
100W charging AND/OR
Laptop
laptop connection
connections
Host 1
Host 2
3x USB 3.0
USB HDMI
HDMI display output
LAN interface
GPI
RS-232 & remote interface
Room PC connections
Host 3
HDMI share output from laptop
4K60 in 16:9 5K30 in 21:9 monitor
HDMI sharing content
Touch panel with optional HDMI ingest
USB speakerphone
INOBUTTON KIT
Push button
Laptop hosts
for BYOM
the meeting
HDMI HDMI USB HDMI USB
TOGGLE ROOMS XT Room PC hub Behind the display installation
TOGGLE ROOMS XT Laptop hub
Under the table installation
CAT6A cable extension up to 70 m (230 ft) From the main Room PC to the laptop device
USB-C 100W
HDMI USB
Wireless presentation/ conference capabilities
ONE CABLE SOLUTION TO TAKE CONTROL OF THE ROOM · 1.8 m USB-C 100W cable included
· 10 m USB-C tested solutions · 2x HDMI outputs: one for room display and one
for content sharing · 4K60/16:9 and 5K30/21:9 widescreen capable
TOGGLE ROOMS XT — 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION
DEVICE INTERFACES
3 application scenarios SWITCH BYOD/BYOM with only one USB-C (100W) cable for a Room PC and laptop
ROOM PC with content sharing
4K60 in 16:9 5K30 in 21:9 monitor
HDMI sharing content
Touch panel with optional HDMI ingest
INOBUTTON KIT
USB
Push button
Laptop hosts
speakerphone for BYOM
the meeting
USB-C 100W
HDMI HDMI USB HDMI USB
TOGGLE ROOMS XT Room PC hub Behind the display installation
TOGGLE ROOMS XT Laptop hub
Under the table installation
CAT6A cable extension up to 70 m (230 ft) From the main Room PC to the laptop device
BYOM
4K60 in 16:9 5K30 in 21:9 monitor
HDMI sharing content
Touch panel with optional HDMI ingest
INOBUTTON KIT
USB
Push button
Laptop hosts
speakerphone for BYOM
the meeting
USB-C 100W
HDMI HDMI USB HDMI USB
TOGGLE ROOMS XT Room PC hub Behind the display installation
TOGGLE ROOMS XT Laptop hub
Under the table installation
CAT6A cable extension up to 70 m (230 ft) From the main Room PC to the laptop device
TOGGLE ROOMS XT — 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION
TECHNICAL SPECIFICATIONS Device configuration via the INOGENI MAESTRO device controller
LINK Technology Range Medium
LAPTOP HUB USB-C connector (host #1)
USB connector (host #2) HDMI input connector (host #2) HDMI output connector USB devices connectors LINK connector GPI
Power connector
HDBaseT 3.0 Up to 40 m (132 ft) when using 4Kp60 Up to 70 m (230 ft) when using 1080p60 CAT6A U/FTP NOTE: We do not recommend using a crimp tool for attaching terminations. Instead, we highly recommend utilizing toolless terminations to ensure the preservation of signal integrity.
Supports USB-C DisplayPort Alternate Mode · DisplayPort up to
3840x2160p60 / 4096x2160p60 · USB 2.0 (480 Mbps) · Charges up to 100W · USB-C cable locking option USB 2.0 Type-B Up to 3840x2160p60 / 4096x2160p60 Cable locking option Up to 3840x2160p60 / 4096x2160p60 Cable locking option USB 2.0 Type-A ports for peripherals HDBaseT 3.0 interface 4-POS terminal block connector 2x Contact-closure control GPI: Controlled by open-drain IO (short to ground) or driven IO Supported voltage range: 0 to 12V max Voltage threshold is 2.3V VOUT: Able to power up the LED on the button of our INO-Button accessory Logic-low level: 0 @ 0.5V Logic-high level: 4.5 @ 5V 24 VDC/160W
ROOM PC HUB LINK connector USB connector (host #3) HDMI input connector (host #3) HDMI display output HDMI share output USB devices GPI
IP interface
RS-232 interface
Power connector AUDIO – HDMI Audio Formats
HDBaseT 3.0 interface USB 3.0 Type-B/5 Gbps Up to 3840x2160p60 / 4096x2160p60 Cable locking option Up to 3840x2160p60 / 4096x2160p60 HDMI with cable locking option Up to 3840x2160p60 / 4096x2160p60 HDMI with cable locking option 3x USB 3.0 Type-A ports 1.8A shared between downstream ports 4-POS terminal block connector 2x Contact-closure control GPI: Controlled by open-drain IO (short to ground) or driven IO Supported voltage range: 0 to 12V max Voltage threshold is 2.3V VOUT: Able to power up the LED on the button of our INO-Button accessory Logic-low level: 0 @ 0.5V Logic-high level: 4.5 @ 5V 10/100Mbps Supports DHCP or static addressing IP control available through RESTAPI and Telnet connections 4-pos terminal block connector Baud rates: 9600 [default], 19200, 38400 and 115200 Data bits: 8 Stop bits: 1 Parity: None Flow control: None 24 VDC/36W
Audio passthrough from input to output LPCM, Dolby Digital and DTS up to 192kHz
TOGGLE ROOMS XT — 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION TECHNICAL SPECIFICATIONS – CONT.
VIDEO – HDMI HDCP compliance HDMI compliance Sampling frequency Video scaling Chroma subsampling CEC
CONTROL Control options
COMPATIBILITY Operating system
Consumed USB tiers UC Logitech cameras and CODECs compatibility
Compliant with HDCP2.3, HDCP2.2 and HDCP1.4 Compliant with HDMI2.0b, HDMI1.4 and DVI1.0 600 MHz Crosspoint switch supports video downscaling from 4K to 1080p YUV/RGB 4:4:4, 4:2:2 Ability to send CEC commands to connected HDMI display sink
Front button For laptop selection RS232 GPI LAN USB
NO driver installation necessary! Windows 7 and above (32/64-bit) macOS 10.10 and above Linux (kernel v2.6.38 and above) 1 tier USB devices connected are reported to the same USB tier. Logitech-tested compatible cameras: Rally and Rally Bar series, MeetUp, MeetUp 2, Scribe, and consumer cameras Logitech UC CODECs: Rally Bar and Rally Bar series (Appliance Mode), Roommate, for MTR and Zoom Rooms
PHYSICAL DETAILS Room PC hub Dimensions (W x L x H) Room PC hub – Power supply Room PC hub – Weight Laptop hub – Dimensions (W x L x H) Laptop hub – Power supply Laptop hub – Weight Package contents
Operating temperature Storage temperature Relative humidity Mounting options
25.1 cm x 11.57 cm x 3.26 cm 9.88″ x 4.56″ x 1.28″ 36W (85-264VAC 50/60Hz to 24V/1.5A DC) 760 g (1.68 lb) 18.4 cm x 11.57 cm x 3.26 cm 7.24″ x 4.56″ x 1.28″ 160W (85-264VAC 50/60Hz to 24V/6.67A DC) 580 g (1.28 lb) 1x TOGGLE ROOMS XT ROOM PC device 1x TOGGLE ROOMS XT LAPTOP device 1x USB-C to USB-C cable 1.8 m /6 ft. 1x USB 3.0 cable (USB-A to USB-B) 1 m/3 ft. 3x terminal block 4-pos 4x mounting brackets 8x M2.5 mounting screws for brackets on product 8x screws for Toggle Rooms devices for table/wall mount 1x power supply 85-264VAC 50/60Hz to 24V/6.67A DC for a LAPTOP hub 1x power supply 85-264VAC 50/60Hz to 24V/1.5A DC for a ROOM PC hub 2x international adapters included in the box (USA/CA or EU/UK/AU/BIS) 1x Quick Start Guide / Thank You card 4x PSU mounting bracket 8 x screws for PSU table/wall mount 8 x rubber feet 0°C to 45°C / 32°F to 113°F -40°C to 105°C / -40°F to 221°F 0% to 90% non-condensing Ability to mount under the table or on a wall
TOGGLE ROOMS XT — 3 HOST SWITCHER FOR USB/HDMI DEVICES WITH AN EXTENSION TECHNICAL SPECIFICATIONS – CONT.
INFORMATION
UPC code – US & CAN UPC code – International market EU/UK/AU/BIS Origin Warranty
051497418717 051497418724
Canada 5 years: Products purchased by the end-user after August 1, 2024
CERTIFICATIONS Certifications device
Certifications power supply -100W Certifications power supply -36W TAA-compliant
FCC, CE, UKCA, RoHS, IEC62368, SoV FCC, CE, UKCA, CB, CB IEC623681:2018, UL, TUV, Test report FCC, CE, UKCA, CB, UL, TUV, EMC
Yes
For technical support, contact us at support@inogeni.com
Copyright © 2025/03 INOGENI | All Rights Reserved. INOGENI name and logo are trademarks or registered trademarks of INOGENI. Use of this product is subject to the terms and conditions of the license and limited warranty in effect at the time of purchase. Product specifications can change without notice.
inogeni.com
This sales sheet is constantly being updated. Please make sure that you have the latest version by regularly visiting inogeni.com
Documents / Resources
 |
INOGENI TOGGLE ROOMS XT 3 Host Switcher For USB [pdf] Owner's Manual TOGGLE ROOMS XT 3 Host Switcher For USB, TOGGLE ROOMS XT, 3 Host Switcher For USB, Switcher For USB |