innodisk EGPL-T102 Single 10GbE LAN Module
Product Specifications
Device Parameters
- Form Factor: M.2 2280 B-M
- Input I/F: PCI Express 3.0 x 2
- Output I/F: 10GbE LAN x 1
- Output Connector: RJ45 x 1
- Dimension (WxLxH): M.2 Board: 22 x 80 x 14.5 mm, Daughter Board: 31.75 x 28 x 17.7 mm
Electrical Specifications
- 2.2.1. Power RequirementInput voltage: +3.3 DC +-5%
- Power Consumption
| RMS (mA) | MAX(mA) | Voltage (V) |
|---|---|---|
| 812.1 | 1068 | 3.3 |
Environmental Specifications
- Temperature Ranges
- Operating: -20 to 55°C
- Storage: Not specified
- Humidity
- Relative Humidity: 10-95%, non-condensing
- Shock and Vibration
- Refer to table for detailed shock and vibration specifications.
- Mean Time between Failure (MTBF)
- MTBF: 11,259,017 Hours
CE and FCC Compatibility
Innodisk EGPL-T102 conforms to CE and FCC requirements.
RoHS Compliance
Innodisk EGPL-T102 is fully compliant with RoHS directive.
Hardware
- LayoutDetailed layout information is provided in the manual.
- Pin DefineDetailed pin definitions are provided in the manual.
REVISION HISTORY
| Revision | Description | Date |
| 1.0 | First Released | Jan, 2024 |
|
1.1 |
1. Add PTP Feature
2. Support -20 to 55C |
Apr, 2024 |
Product Introduction 1.1. Overview
Innodisk EGPL T102 is designed with M.2 2280 form factor with B/M key, EGPL T102 supports PCIe Gen 3.0 with dual lane to single 10 GbE LAN, optimized for higher performance and lower power, which brings you a flexible expansion solution for embedded systems.
Features
- Marvell AQtion Ethernet Controller
- Support 10G/5G/2.5G/1000M/100M/10M LAN speed
- Lowest power and smallest 10GbE expansion solution
- Support x2/x1 PCI Express with Gen3/Gen2
- Tiny daughter board with high speed shielding cable
- Support Precision Time Protocol (PTP-1588v2)/AVB
- Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
- Operation temperature -20°C to +55°C support
- 30μ” golden finger, 3-year warranty
- Industrial design, manufactured in Innodisk Taiwan
Product Specifications
Device Parameters
Table 1: Device Parameters
| Form Factor | M.2 2280 B-M |
| Input I/F | PCI Express 3.0 x 2 |
| Output I/F | 10GbE LAN x 1 |
| Output Connector | RJ45 x 1 |
| Dimension (WxLxH) | M.2 Board: 22 x 80 x 14.5 mm Daughter Board: 31.75 x 28 x 17.7 |
Electrical Specifications
Power Requirement
Table 2: Power Requirement
| Item | Connector | Rating |
| Input voltage | M.2 Golden Finger | +3.3 DC +-5% |
Power Consumption
Table 3: Power Consumption
| RMS (mA) | MAX(mA) | Voltage (V) |
| 812.1 | 1068 | 3.3 |
Environmental Specifications
Temperature Ranges
Table 4: Temperature Ranges
| Temperature | Range |
| Operating | -20°C to +55°C |
| Storage | -55°C to +95° |
Humidity
Relative Humidity: 10 95%, non condensing
Shock and Vibration
Table 5: Shock and Vibration
| Reliability | Test Conditions | Reference Standards |
| Vibration | 7 Hz to 2K Hz, 20G, 3 axes | IEC 68-2-6 |
| Mechanical Shock | Duration: 0.5ms, 1500 G, 3 axes | IEC 68-2-27 |
Mean Time between Failure (MTBF)
Reliability prediction methodology provides the basis for reliability evaluation and analysis. The purpose of the prediction is to predict the life time of the product in units of failure rate and MTBF.
Table 6: Mean Time between Failure (MTBF)
| Product | Condition | MTBF (Hours) |
| EGPL-T102 | The analysis is at 25°C ambient temperature by
Telcordia SR-332, Issues 4, Method I, Case 3 under Ground Benign, Controlled environment, 50% operation stress |
11,259,017 |
CE and FCC Compatibility
EGPL T102 conforms to CE and FCC requirements.
RoHS Compliance
EGPL T102 is fully compliant with RoHS directive.
Hardware
Layout
| Label | Connector Type | Function |
|
CN1 |
WAFER SMD/20P/90D P:0.5mm H2.75mm | GbE LAN Signal LED Signal |
| Label | Connector Type | Function |
|
CN1 |
WAFER SMD/20P/90D P:0.5mm H2.75mm | GbE LAN Signal LED Signal |
|
CN2 |
10GbE RJ45 DIP/1X1/90D 8P8C
w/LED:GO-GO Tab/D |
GbE LAN Port LED Indicator |
Pin Define
Table 9: M.2 B M Key Pin Define
| Signal Name | Pin # | Pin # | Signal Name |
| 75 | CONFIG_2 (GND) | ||
| 3.3V | 74 | 73 | GND |
| 3.3V | 72 | 71 | GND |
| 3.3V | 70 | 69 | CONFIG_1 (NC) |
| NC | 68 | 67 | NC |
| Module Key M | |||
| NC | 58 | ||
| NC | 56 | 57 | GND |
| PEWAKE# | 54 | 55 | REFCLKp |
| CLKREQ# | 52 | 53 | REFCLKn |
| PERST# | 50 | 51 | GND |
| NC | 48 | 49 | PERp0 |
| NC | 46 | 47 | PERn0 |
| NC | 44 | 45 | GND |
| SMB_DATA | 42 | 43 | PETp0 |
| SMB_CLK | 40 | 41 | PETn0 |
| NC | 38 | 39 | GND |
| NC | 36 | 37 | PERp1 |
| NC | 34 | 35 | PERn1 |
| NC | 32 | 33 | GND |
| NC | 30 | 31 | PETp1 |
| NC | 28 | 29 | PETn1 |
| NC | 26 | 27 | GND |
| NC | 24 | 25 | NC |
| NC | 22 | 23 | NC |
| NC | 20 | 21 | CONFIG_0 (GND) |
| Module Key B | |||
| NC | 10 | 11 | NC |
| NC | 8 | 9 | NC |
| NC | 6 | 7 | NC |
| 3.3V | 4 | 5 | NC |
| 3.3V | 2 | 3 | GND |
| 1 | CONFIG_3 (GND) | ||
I/O Connector Mechanical Drawing & Pin Defines
Table 10: Wire to Board SMD 20P Connector Pin Define
| Pin # | Signal Name |
| 1 | LED_A2 |
| 2 | LED_A1 |
| 3 | LED_A0 |
| 4 | 3.3V |
| 5 | GND |
| 6 | P0_D_N_CN |
| 7 | P0_D_P_CN |
| 8 | GND |
| 9 | GND |
| 10 | P0_C_N_CN |
| 11 | P0_C_P_CN |
| 12 | GND |
| 13 | GND |
| 14 | P0_B_N_CN |
| 15 | P0_B_P_CN |
| 16 | GND |
| 17 | GND |
| 18 | P0_A_N_CN |
| 19 | P0_A_P_CN |
| 20 | GND |
EGPL T102 Mechanical Drawing
Cable Mechanical Drawing
Packing List
- EGPL-T102 M.2 Board x 1
- EGPL-T102 Daughter Board x 1
- Board to Board LAN Cable x 1
Software Support
- Microsoft Windows System 10 and later releases
- Linux Kernel 3.10 and later releases
Installation Guide
Please download driver from Myinnodisk or Innodisk official web site.
https://myinnodisk.innodisk.com/myinnodisk/Login.aspx
Appedix
Innodisk Corporation
REACH Declaration
Tel: (02)7703-3000 Fax:(02) 7703-3555 Internet: https://www.innodisk.com/
Innodisk Corporation pursues its social responsibility for global environmental preservation by committing to be compliant with REACH regulation (REGULATION (EC) No 1907/2006).
We hereby confirm that the products),Scope: Flash Memory, DRAM Module and Embedded Peripherals Products.
- The standard products of not listed in the Appendix2 meet the requirements of REACH SVHC regulations(SVHCs < 0.1% in Article), as described in the candidate list table currently including 233 substances (release date: 17-Jan-2023) and shown on the ECHA website. https://echa.europa.eu/candidate-list-table
- The standard products listed in the Appendix2 contain(s) one or more hazardous substances or constituents exceeding 0.1% by weight in article if not otherwise specified in candidate list table.
Where the threshold value is exceeded, the substances in question are to be declared in accompanying. (SVHCs > 0.1% in Article). - Comply with REACH Annex XVII.
Contact us
Branch Offices:
USA
usasales@innodisk.com
+1-510-770-9421
Europe
eusales@innodisk.com
+31-40-3045-400
© 2024 Innodisk Corporation. All right reserved. Specifications are subject to change without prior notice.
Documents / Resources
 |
innodisk EGPL-T102 Single 10GbE LAN Module [pdf] Instruction Manual EGPL-T102, EGPL-T102 Single 10GbE LAN Module, Single 10GbE LAN Module, 10GbE LAN Module, LAN Module, Module |