INMO IMTP02 Controller User Guide

INMO Controller
User’s Getting Started Guide

LED Indicator Status

Quick Start

Step 1: Power On
Slide the bottom power switch to the “ON” position on the right.

Step 2: Enter Pairing Mode
For first-time connection or when unpaired, the blue light flashes quickly. If paired but not connected, the blue light flashes slowly.

Step 3: Pair on the Glasses
Open “Glasses – INMO Peripheral Management.” Search for and select “INMO Controller.”
Step 4: Pairing Successful – Start Using
The white light stays on for 3 seconds and then turns off, indicating a successful connection.
Step 5: Select Control Mode
Toggle the mode switch at the top to switch between Air Mouse mode and Touchpad mode.

Core Features

Air Mouse Mode Instructions
Single-finger slide: Scroll vertically or horizontally through lists.
Tap once: Confirm.
Top-down slide: When the Air Mouse pointer hovers at the top of the screen, slide down to open the Notification Center and Control Center.
Press Fn once: Recenter the Air Mouse.
Fn + vertical slide on touchpad: Zoom in or out centered on the pointer position.
Touchpad Mode Instructions
Single-finger slide: Move the cursor.
Tap once: Confirm.
Right-side slide area: Scroll vertically.
Top-down slide: Pull down to open the Notification Center and Control Center.
Top horizontal slide: Scroll horizontally.
Fn + vertical slide: Zoom in or out centered on the pointer position.
Return Button
Click: Return to the previous level.
Long press: Return to desktop.
Fn Key
Fn + side up/down slide: Zoom in or out, centered on the pointer position.
Fn + power switch toggle: Clear INMO Controller pairing records and force pairing mode.
Fn + volume +/-: Increase or decrease brightness continuously (10% increments).
Direction Keys
Click to switch focus (not universally supported).
OK Button
Click to confirm; long press to activate the voice assistant.
GO Button
Click behavior depends on the current application; long press to launch a user-preset function or application.
Power Switch
Power on/off.

Product Parameters

Legal Notice

• Copyright © Sichuan Yingmu Technology Co., Ltd. All rights reserved. This material is for reference only and does not constitute any form of commitment or undertaking.
• The content in this product manual is provided on an “as is” basis. Unless required by applicable law, Sichuan Yingmu Technology Co., Ltd. makes no express or implied warranties regarding the content of this manual.
• To the extent permitted by applicable law, Sichuan Yingmu Technology Co., Ltd. shall not be liable for any special, incidental, indirect, or consequential damages arising from the use of this manual or the product, including but not limited to loss of profits, data, goodwill, or anticipated savings.
• If you need to export, re-export, or import this product, including its software and technical data, you must comply with all applicable import and export laws and regulations.
• Sichuan Yingmu Technology Co., Ltd. reserves the right to modify any information in this manual at any time without prior notice and assumes no liability arising from such modifications.

Safety Information

• Keep the product dry. Avoid using it in dusty, humid, or high-salt environments (such as seaside areas) to prevent circuit malfunctions.
• Do not use this product during thunderstorms, as they may cause malfunctions or electric shock hazards.
• Use this product within the temperature range of 0°C-40°C. Extremely high or low temperatures may cause automatic shutdown, accelerate aging, or result in malfunction.
• Do not expose the product to high temperatures or heat-generating devices such as direct sunlight, heaters, microwaves, ovens, or water heaters.
• Do not disassemble or modify the product, insert foreign objects, or immerse it in water or other liquids.
• Do not throw the product into fire.
• Dispose of the product according to local regulations and recycling requirements.
• Keep the product away from pets and children.
• Do not use this product where wireless devices are prohibited.
• Follow hospital and medical facility rules regarding wireless devices.
• Maintain at least 15 cm distance from implanted medical devices such as pacemakers, cochlear implants, or hearing aids.
• This product contains a built-in lithium battery. Handle with care.
• Do not replace the battery yourself.
• If battery fluid leaks, stop using the product immediately and avoid contact with skin or eyes. Rinse thoroughly with water and seek medical advice if contact occurs.
• Dispose of the battery properly according to local regulations.
• Use only approved charging sources within the specified range.
• Clean the charging port carefully using a soft cloth or cotton swab.
• Do not crush, cut, or expose the battery to fire or extreme pressure conditions.

Disclaimer & Limitation of Liability

• This product is not a toy. Keep it out of the reach of children and use caution where children may be present.
• Read this manual carefully before using the product. This disclaimer affects your legal rights and the safe use of the product.
• The company is responsible only for official systems and updates. Unofficial third-party systems may pose security risks.
• Perform system updates only through official channels.
• Installing third-party ROMs or modifying system files may cause instability and void support obligations.
• This product is an intelligent controller designed to support a smart wearable experience when functioning normally and without damage.
• Sichuan Yingmu Technology Co., Ltd. reserves the right to update this disclaimer, and the latest published version shall prevail.
• By using this product, you acknowledge and accept this disclaimer and agree to use the product responsibly and only for lawful and proper purposes.
• Sichuan Yingmu Technology Co., Ltd. shall not be liable for injury or property damage caused by failure to use the product according to this manual.

After-Sales Service Policy

Thank you for using this AR glasses accessory from Sichuan Yingmu Technology Co., Ltd. We hope it becomes an indispensable companion in your work and everyday life. Our attentive, high-quality service is designed to give you peace of mind while using our product.

Warranty Instructions

The INMO intelligent controller complies with national warranty regulations and is covered during the valid warranty period under normal usage conditions.

• For non-human-induced malfunctions caused by product quality issues, warranty services are available upon presentation of a valid purchase invoice and warranty certificate.
• Within 7 days of purchase: If a non-human-induced performance malfunction occurs and the product remains in resale condition, you may return, exchange, or repair the product.
• Between 8 and 15 days after purchase: You may exchange or repair the product under the same conditions.
• Within one year of purchase: You may receive free repair services for non-human-induced malfunctions.

Warranty exclusions include but are not limited to:

• Altered or mismatched warranty certificates.
• Unauthorized disassembly or repair.
• Damage caused by improper use, maintenance, or servicing.
• Damage caused by force majeure.
• Missing warranty certificate or proof of purchase.
• Expired warranty period.
• Damage caused by dropping, crushing, or liquid exposure.
• Malfunctions caused by non-INMO accessories.

Customer Support
For assistance, contact customer service at +1800-689-8547, visit www.inmoxr.com, email support@inmoxr.com, or consult a local authorized service center or dealer.