GC Air 20U Bi-color Temperature Column Light
Quick Start Guide
Disclaimer
GC Air 20U is an airbag light made of TPU.
- Before use, make sure the airbag is filled with air before turning on the light. If the light is turned on directly without filling it with air, high temperature will be generated, which may cause damage to the airbag.
- Avoid contact with sharp objects, corrosive liquids and high temperature substances during use, which may cause damage to the airbag.
- Although GC Air 20U is an airbag light body, please try to avoid squeezing and falling from a high altitude, which may also cause damage to the airbag.
- Using a mobile phone to power GC Air 20U may damage the mobile phone, so please use it with caution.
The above damage is outside our company’s warranty, and the secondary damage and losses caused by this are not related to our company.
Component Name
| Light strip power | (Max) 19.2W |
| Total power | 20W |
| Input voltage current | (Non-PD Protocol) 5V2A (PD Protocol) 9V3A, 12V2A, 15V1.5A |
| Color temperature range | 2700K、4000K、5600K、6500K |
| Weight | #230g |
| USB cable length | 2m |
Power ON/OFF
Connect the DC power supply through the USB-C power cable, and short press the power button to turn on or off.
Brightness Adjustment
After turning on, short press the button to increase the brightness level, 
and short press the button to decrease the brightness level 
There are a total of 5 brightness levels, 0%、5%、10%、25%、50%、100%.
Color temperature adjustment
After turning on, short press M button to switch the color temperature level, which can be switched cyclically; the light has a total of 4 color temperature levels: 2700K, 4000k, 5600k and 6500k.
NOTICE :
After connecting to a power supply device that supports the PD protocol, the GC Air 20U controller displays a green light and can be used at full power. While after connecting to a power supply device that does not support the PD protocol, the GC Air 20U controller displays a blue light and cannot be used at full power.
Safety Tips
- Please inflate before turning on the light.
- When this product is working, do not touch the magnetic attraction(i.e. the place with the “High Temperature Caution” mark).
Product Dimensions
Product Warranty
| Product model | |
| Product Bar code | |
| Sales date | |
| Customer name | |
| Customer phone number | |
| Customer address |
Shenzhen Yingzhiqi Technology Co., Ltd. No. 31, Jia’an Road, Haile Community, Xin’an Street, Bao’an District, Shenzhen Room 705, Building 8, Area 41
Te:+86 40096 80096 86 18928447616
Website: www.in-kee.com
Shenzhen Yingzhiqi Technology Co., Ltd.
Inspection: qualified
Documents / Resources
 |
INKEE GC Air 20U Bi Color Temperature Column [pdf] User Guide FB01105GC, v1.3, GC Air 20U Bi Color Temperature Column, GC Air 20U, Bi Color Temperature Column, Temperature Column, Column |
