INGRID BSA Bottom Bracket User Manual

INGRID BSA Bottom Bracket

IMPORTANT NOTICE

This manual is intended primarily for use by professional bicycle mechanics. Users who are not professionally trained for bicycle assembly should not attempt to install the components
If any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, contact your dealer or a local bicycle shop for their assistance.
Make sure to read all instruction manuals included with the product.
You can find al the manuals and specs on our website http://ingrid.bike.

MAINTENANCE

This product is not guaranteed against natural wear and deterioration from normal use and aging.

PERIODICALLY CHECK THE TIGHTENING. INCORRECT TIGHTENING CAN CAUSE MALFUNCTIONS OR BREAKAGE

BOTTOM BRACKET WIDTH

INGRID BSA and T47 BB cups comply with the required asymmetry of +2.5mm on the DRIVE SIDE and the required dimensions for INGRID spindles and cranksets. For more information see the spindles and cranksets manuals.

INSTALLATION

68/ 73 / 86.5/89.5/92 mm T47 Bottom Bracket

68/ 73 mm English Threaded Bottom Bracket (BSA)