CRC1 Bluetooth Remote Control
“
Specifications
- Frequency: 2.4 GHz Standard IEEE 802.15
- Connection Range: 3m
- Voltage / Battery: 3V / CR2032
- Dimensions: 43x70x17.6 mm / 1.7×2.8×0.7 inch
- Weight: 39.5 g / 1.39 oz
Product Information
Description
The Bluetooth Remote Control is designed to control selected
functions and navigate menus remotely on your device.
Description of Control
- Power Button: Functions include powering
on/off, image calibration, returning to the menu,
photographing/video recording, entering the last menu. - Capture Button: For capturing
images/videos. - E-Zoom Button: Enables digital zoom and
entering the next menu. - Rangefinding Mode: Used for rangefinder
operations. - Menu Button: Allows you to enter the menu,
confirm option parameters, return to the previous menu, freeze the
picture, and adjust laser marking center.
Remote Control Activation
To activate the remote control, open the Bluetooth on your
device. It will automatically pair with the nearest remote control
within a connection range of 3m.
Battery Installation
To install the battery, rotate to open the cover and insert a
CR2032 3.0V lithium battery coin cell.
Installation
Install the Bluetooth Remote Control using the Remote Control
Mount on a Keymod rail or Mlock rail with dimensions of
50mm/1.57in/40mm.
FAQ
Q: How many remote controls can be connected to the device at
once?
A: Only one remote control can be connected to the device at a
time.
Q: What type of battery does the remote control use?
A: The remote control uses a CR2032 3.0V lithium battery coin
cell.
“`
User Guide
Bluetooth Remote Control
1 Description
The Bluetooth Remote Control is designed to control remotely device’s selected functions and to navigate its menu.
2 Specifications
Frequency 2.4 GHz Standard
IEEE 802.15 Connection Rangem
3 Voltage / Battery
3V / CR2032 Dimensions, mm / inch 43x70x17.6 / 1.7×2.8×0.7
Weight, g / oz 39.5 / 1.39
3 Description of Control
Power Button
1Powered on/off 2Image calibration 3Return to the menu
1Photographing/Video recording 2Enter the last menu
Capture button
E-Zoom button
1Digital zoom 2Enter the next menu
Rangefinding mode
Rangefinder mode
Menu button
1Enter the menu 2Confirm option parameters and return to the previous menu
+
Freeze the picture
+
Laser markig center adjustment
4 Remote Control Activation
··
Open Bluetooth of device Automatically pair with the nearest remote control
Connection Range:3m
Pairing
…….. ……..
OFF
Connected
Note: Only one remote control can be connected to the device at a time.
5 Battery Installation
Close
Open
Rotate to open the cover.
CR2032
3.0V lithium battery coin cells
6 Installation
Bluetooth Remote Control Remote Control Mount
Keymod rail
Mlock rail
50mm
1.57in/40mm
7 Legal and Regulatory Information
Frequency range of Bluetooth radio module: 2.400-2.4835GHz Power of radio module: 20dBm
InfiRay Technologies Co., Ltd. declares that the Bluetooth Remote Control complies with the directives 2014/53/EU and 2011/65/EU. User information on the disposal of electrical and electronic devices (private households) 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2023/1542 (Battery Regulation): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information, The battery is marked with this symbol, which may include lettering to indicate cadmium(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point, For more information see www.recyclethis.info
Regulatory information for USA 1. This device complies with part 15 of the FCC Rules. FCCID2AY3N-CRC1. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
8 Safety Instructions for Use
1 Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. 2Even used batteries may cause severe injury or death. 3Call a local poison control center for treatment information. 4Compatible battery type CR2032. 5. Nominal battery voltage 3.0V. 6. Non-rechargeable battenes are not to be recharged.
7Do not force discharge, recharge, disassemble heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may resut in injury due to venting, leakage or explosion resulting in chemical bums. 8Ensure the batteries are installed corectly according to polarity (+and-) 9Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries. 10Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations. 11Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
WARNING
· INGESTION HAZARD: This product contains a button cell or coin battery.
· DEATH or serious injury can occurif ingested. · A swallowed button cell or coin battery can
cause Internal Chemical Burns in as little as 2 hours. · KEEP new and used batteries OUT OF REACH of CHILDREN · Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
80mm
500mm
Documents / Resources
 |
InfiRay CRC1 Bluetooth Remote Control [pdf] User Guide 2AY3N-CRC1, 2AY3NCRC1, crc1, CRC1 Bluetooth Remote Control, CRC1, Bluetooth Remote Control, Remote Control, Control |