SHIELD_XENSIV_A XENSIV™
sensor shield release notes
About this document
Scope and purpose
Thank you for your interest in the SHIELD_XENSIV_A XENSIV™ sensor shield. This document lists kit contents, installation requirements, kit documentation, and limitations.
Release contents
1.1 Kit contents
The SHIELD_XENSIV_A XENSIV™ sensor shield includes the following:
- XENSIV™ sensor shield
- Quick start guide
Tool information
2.1 Software and tools
Code examples for this shield require ModusToolbox™ software version 3.1 or later. This is available on the ModusToolbox™ software webpage. Refer to the kit guide for more details.
2.2 Code examples and kit collateral
The kit webpage contains both the documents and hardware files. Additionally, the code examples are available in the Infineon GitHub repository.
2.3 Installation
All the required software installation instructions are provided in the kit guide, which is available on the kit webpage.
2.4 Kit revision
This is the initial revision (Rev. **) of the SHIELD_XENSIV_A XENSIV™ sensor shield.
2.5 Known issues and limitations
• Power consumption limitation XENSIV™ sensor shield consumes higher power when both, the PAS CO2 sensor and RADAR sensor (configured in continuous wave mode) are operated simultaneously. This can exceed the base board’s power capabilities, leading to issues with sensor operation and system performance Workaround:
– Consider using the external USB power supply (from J11 USB connector) option provided on the XENSIV™ sensor shield, if simultaneous operation is required.
2.6 Documentation
The following kit documents are available on the kit webpage.
- SHIELD_XENSIV_A XENSIV™ sensor shield kit guide
- SHIELD_XENSIV_A XENSIV™ sensor shield quick start guide
- SHIELD_XENSIV_A XENSIV™ sensor shield release notes
2.7 Technical support
For assistance or product-related queries, contact Infineon Support or post your queries on the Infineon Developer Community.
2.8 Additional information
- For more information about the ModusToolbox™ software functionality and releases, see the ModusToolbox™ software webpage
- For a list of trainings on ModusToolbox™ software, see the ModusToolbox™ Software Training webapge
- For more information about the XENSIV™ PAS CO2 sensor portfolio and technical documentation, see CO2 sensors
- For more information about the XENSIV™ pressure sensor portfolio and technical documentation, see Pressure sensors for IoT
- For more information about theXENSIV™ 60 GHz RADAR sensor product portfolio and technical documentation, see XENSIV™ 60 GHz radar MMICs
- For more information about the XENSIV™ MEMS microphone portfolio and technical documentation, see XENSIV™ MEMS microphones for consumer electronics
- For more information about the OPTIGA™ embedded security solutions and technical documentation, see OPTIGA™ embedded security solutions
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Important notice
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”).
With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application.
Warnings
Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
Edition 2024-11-04
Published by
Infineon Technologies AG
81726 Munich, Germany
©2024 Infineon Technologies AG
All Rights Reserved.
Do you have a question about any
aspect of this document?
Email: erratum@infineon.com
Document reference
IFX-apb1711611463762
Documents / Resources
 |
infineon Xensiv Sensor Shield [pdf] Instruction Manual Xensiv Sensor Shield, Sensor Shield, Shield |