infineon CYBLE-343072-EVAL-M2B Airoc Bluetooth LE Module Evaluation Kit User Guide

infineon CYBLE-343072-EVAL-M2B Airoc Bluetooth LE Module Evaluation Kit

Contents hide

1 Kit contents

2 Before you start

2.1 Run the `HelloClient’ application

3 AIROCTM Bluetooth® LE module evaluation kit board details

4 AIROCTM Bluetooth® LE module evaluation kit pinout details

5 Documents / Resources

5.1 References

6 Related Posts

Kit contents

CYW9BTM2BASE1 baseboard

CYBLE-343072-EVAL Bluetooth® radio card based on AIROCTM CYW20835 silicon (connected to the baseboard using the M.2 connector)
USB standard-A to Micro-B cable

Quick start guide (this document)

www.cypress.com/CYBLE-343072-EVAL-M2B

Before you start

Register on the Developer community and then download and install ModusToolboxTM software v2.3 (or later) with the Bluetooth® SDK at https://www.cypress.com/products/modustoolbox.

Do the following to download and install the `HelloSensor’ code example. This step will also install the `HelloClient’ peer application required later.
a. In Eclipse IDE for ModusToolboxTM software, select File > New application. This launches the project creator.
b. In the project creator, click AIROC™ Bluetooth® BSPs.
c. Select the `CYBLE-343072-EVAL-M2B’ kit and click Next.
d. Click Create and then click Close.
Note: The kit is pre-programmed with the `Hello Sensor’ application.
Connect a USB cable between the PC and CYBLE-343072-EVAL-M2B (J6) to power the kit.

ModusToolboxTM software

Run the `HelloClient’ application

Locate the `HelloClient’ peer sample application that complements the `HelloSensor’ application at …mtw23mtb_sharedwiced_btsdk toolsbtsdk-peer-apps-blerelease-v3.1.0 hello_sensorWindowsHelloClient Releasex64.
Run the HelloClient executable and select the `HelloSensor’ device, which appears as a device with the name `Hello’.

When prompted, allow pairing from the client to the HelloSensor device.
In the HelloClient window, select Allow Notifications next to the Hello Input characteristic.

Press button SW3 on the evaluation kit. Observe that the Value field shows the Hello 1 message.
Press SW3 again, and observe that the Value field is incremented.

AIROCTM Bluetooth® LE module evaluation kit board details

CYBLE-343072-EVAL-M2B

VDDIO current measurement jumper (J17)
Peripheral enable jumper (J19)

VDDIO select jumper (J7)
Baseboard power status LED (D3)

VBAT select jumper (J8)
USB connector for programming/USB-UART (J6)

VPA select jumper (J16)
KitProg3 based on PSoCTM 5LP MCU (U12)

KitProg3 mode select (SW5)
KitProg3 status LED (D5)

Debug interface select jumper (SW8)
Debug header (J13)

Recovery button (SW1)
Header compatible with Arduino (J1)

Reset button (SW2)
Header compatible with Arduino (J2)
User button (SW3)
User LEDs (D1, D2)
User LED/DMIC switch (SW4)
Digital mic sound port (J16)
AIROCTM CYBLE-343072-EVAL-M2B
Analog mic footprint (MIC1)
Thermistor (TH2)
Thermistor enable jumper (J18)
Header compatible with Arduino (J4)
Bluetooth® I/O header (J12)
Header compatible with Arduino (J3)
Bluetooth® I/O header (J11)
Ambient light sensor (U10)

AIROCTM Bluetooth® LE module evaluation kit pinout details

CYBLE-343072-EVAL-M2B

Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME.

Additional information
For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com).

Warnings
Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any lifeendangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.