inateck KB06006 Keyboard and Mouse Combo
Precautions
- Optical technology ensures accurate detection of mouse movement on most surfaces. Do not use the mouse on any reflective, transparent, glass, or uneven surfaces.
- Use a dry, soft cloth to clean the product.
- Do not forcibly disassemble the product.
- Do not look directly at the light from the bottom of the mouse.
- Do not use the product in the rain, under sunlight, or near fire.
- Do not clean this product directly with water.
Device and System Requirements
- The device needs to support Bluetooth 5.0 and above;
- Multimedia features may not be fully functional in some operating systems.
Note: Windows is the default system.
Product Appearance
How to Use
Battery Installation
Open the battery compartment and install the batteries as indicated.
Note: The keyboard uses 2 AAA batteries, and the mouse uses 1 AA battery. When not using the mouse for an) extended period or while carrying it, please switch it to the OFF position or remove the batteries.
Using in Bluetooth Mode
Toggle the switch on the keyboard to ”ON” position to enter Bluetoath channel 1 broadcasting mode. You will see “Inateck K.606006-Kn in the Bluetooth list on your device. Click to connect.
Toggle the switch on the mouse to the “ON” position to enter Bluetooth Channel 1 mode. You will see “Inateck KB06006-M” In the Bluetooth device list. Cilek to connect. If the connection is unsuccessful, you can press and hold the connection mode switch button to enter Bluetooth Channel 1 broadcasting mode. You can also press the connection mode switch button briefly to toggle between BT1 and BT2.
Shortcut Keys
How to Use F1-F12
You may press 
+
to enable/disable the lock. (The keyboard disables the lock by default.)
When the Fn Lock is enabled:
Pressing 
triggers the function owned by key.
Pressing + dims the screen brightness.
This method applies to all F keys ( +
).
When the Fn Lock is disabled (Default Status):
Pressing dims the screen brightness.
Pressing+ triggers the function owned by key.
This method applies to all F keys – .
Note: The following operations are only applicable to Windows.
Al Key Function Description
- On Windows devices, the Al key can be used to wake up Inateck Origin, a software that supports
- Al translation, Al chat, and other functions. You can search for Inateck Origin on the Microsoft Store to download it.
Keyboard
Short press the Al key:
- If no text is copied, it will activate Al chat;
- If text is copied, it will activate Al translation.
Mouse
- Long press the DPI Switch Button/Al Button:
- If no text is copied, it will activate Al chat;
- If text is copied, it will activate Al translation.
Multi-Device Input Bridging
- If the mouse is connected to three different Windows devices via Bluetooth channels 1/2/3 (up to three devices) under the same local area network, you can enter Inateck Origin to enable the Multi-
- Device Input Bridging, allowing the transfer of documents, spreadsheets, images, and other files.
Note: The transfer speed is affected by the bandwidth of the local area network. - If the keyboard is connected to three different Windows devices via Bluetooth channels 1/2/3 (up to three devices) under the same local area network, you can press the BT1/BT2/BT3 key to switch between different Windows devices.
Description for Other Keys
LED Indicator
Kayhoard
Mouse
Note: During use, if the indicator light on the bottom of the mouse is flashing, it indicates low battery.
Restore Factory Defaults
Hold + 
for 3 seconds and then all indicators will blink 3 times once the factory reset is completed.
Sleep Mode
After 30 minutes of inactivity, the keyboard/mouse will enter sleep mode. The connection can be rebuilt with a press of any key.
Product Specifications
Keyboard
Mouse
Packing List
- KB06006 * 1
- User Manual * 1
- AA Battery * 1
- AAA Battery * 2
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU .
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck-euro-compliance.
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Battery Safety Warning:
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
For Product and Battery Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Email: service@inateck.com
Postal code: 04178
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United
Kingdom, HP16 OAL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian
Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129
Documents / Resources
 |
inateck KB06006 Keyboard and Mouse Combo [pdf] Instruction Manual KB06006-K, 2A2T9-KB06006-K, 2A2T9KB06006K, KB06006 Keyboard and Mouse Combo, KB06006, Keyboard and Mouse Combo, Keyboard, Mouse, Combo |