inateck KB06004-R Wireless Receiver for Wireless Keyboard and Mouse Combo User Manual
Product Overview
This wireless receiver supports dual connection — one receiver can simultaneously connect to one wireless keyboard and one wireless mouse. It features plug-and-play setup and built-in receiver storage in the mouse for easy portability.
Product Specifications
Item : Specification
Wireless Protocol : 2.4GHz Wireless Transmission
Interface Type : USB-A
Supported Devices : 1 Wireless Keyboard + 1 Wireless Mouse
Operating Range : Up to 10 meters (open space)
System : Compatibility Windows / macOS / Linux / Chrome OS
Pairing Method : Pre-paired at factory, plug and play
Storage Design : Receiver can be stored in mouse compartment
Power Supply : USB-powered (no external power needed)
How to Use
- Insert the receiver into a USB port on your computer.
- Switch on your wireless keyboard and mouse.
- Devices will automatically pair within a few seconds.
If not working, check the batteries or try a different USB port.
Storage Tip
When not in use, store the receiver inside the storage slot on the bottom of the mouse to prevent loss.
FAQ
Q1: Receiver not detected?
Try another USB port or restart the computer.
Q2: Mouse or keyboard not responding?
Check that devices are powered on and within the 10m range. Replace batteries if needed.
Q3: Lost the receiver?
Contact customer service to purchase a replacement and get pairing instructions.
FCC Warning Statement: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
inateck KB06004-R Wireless Receiver for Wireless Keyboard and Mouse Combo [pdf] User Manual 2A2T9-KB06004-R, 2A2T9KB06004R, KB06004-R Wireless Receiver for Wireless Keyboard and Mouse Combo, KB06004-R, Wireless Receiver for Wireless Keyboard and Mouse Combo, Receiver for Wireless Keyboard and Mouse Combo, Wireless Keyboard and Mouse Combo, Keyboard and Mouse Combo, Combo, Receiver |
