inateck KB06004 Keyboard and Mouse Combo
Precautions
- Optical ensures accurate of mouse movement on most surfaces. Do not use the mouse on any reflective, transparent, glass, or uneven surfaces.
- Use a dry, soft cloth to clean the product.
- Do not forcibly disassemble the
- Do not look directly at the light from the bottom of the mouse.
- Do not use the in the rain, under sunlight, or near fire.
- DO not clean this product With water.
System Requirements
- Windows 7, Windows 8, Windows 10, Windows 1 1 or higher;
- Android 3.2 or higher;
- Mac OS 10.5 or higher.
Note: Multimedia features may not fully functional in different operating system versions.
Product Diagram
How to Use
Battery Installation
Open the battery compartment and install the batteries as indicated.
Note: The keyboard uses 2 AAA batteries, and the mouse uses 1 AA battery. When not using the mouse for an extended period or while carrying it, please switch it to the OFF position or remove the batteries.
Using in 2.46 Adapter Mode
2.4G adapter mode is the default mode for the and mouse. Remove the adapter from the mouse’s battery compartment (close the battery compartment after removal), then insert it into the computer’s USB port. Next, switch the switches on the keyboard and mouse to the “ON”
The keyboard and mouse will automatically connect to the adapter.
Using in Bluetooth Mode
Toggle the switch on the to ‘ON” press and hold BTI or BT2 to enter broadcasting mode. You will see in the Bluetooth list on your device .Click to connect. (It is recommended to prioritize pairing with suffix 50, for Windows 7 and earlier systems, only suffix 3.0 is for display.) 
Toggle the switch on the mouse to “ON” position, briefly press the connection mode switch button to switch to BTI or BT2, then press and hold the connection mode switch button to enter broadcastingmcde. You will see ‘KB06004M3.O/KB06CK)4M5.O” in the Bluetooth list on your device. Click to connect. (It is recommended to prioritize pairing with suffix 5.0; for Windows 7 and earlier systems, only suffix 3.0 is supported for display.)
Shortcut Keys
How to Use F1-F12
You may pres
to enable/disable the 
lock. (The keyboard disables the lock by default.)
When the Fn Lock is enabled:
- Pressing
triggers the function owned by key. - Pressing
dims the screen brightness. - This applies to all F keys
When the Fn Lock is disabled (Default Status):
- Pressing dims the screen brightness.
- Pressing triggers the function owned by key.
Description
Description for Other Keys
Note: The default layout is Windows.
LED Indicator
Keyboard
Mouse
Note: During use, if the indicator light on the bottom of the mouse is flashing, it indicates low battery.
Sleep Mode
After 30 minutes of inactivity, the keyboard/mouse will enter sleep mode. The connection can be rebuilt with a press of any key.
Product Specifications
Keyboard
Mouse
Packing List
- KB06004 • 1
- User Manual 1
- AA Battery * 1
- AAA Battery 2
EU Declaration of Conformity
Inateck Ltd. hereby declares that this device complies with the Directive 2014/53,’ELJ .
A COPY Of the Declaration Of Conformity Can be accessed from https://www.inateck.de/pages/inateck-euro-compliance.
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Battery Safety Warning:
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
Service Center
Europe
- F&M Technology GmbH
- Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
- Fax: +49 3415199 8413
- Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
- Inateck Technology Inc.
- Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
- Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
- Fraunhoferstraße 7, 04178 Leipzig, Deutschland
- Tel: +49 3415199 8410
- Email: service@inateck.com
- Postal code: 04178
Inateck Technology (UK) Ltd.
- 95 High Street, Office B, Great Missenden, United
- Kingdom, HP16 OAL
- Tel: +4420 3239 9869
Manufacturer
- Shenzhen Inateck Technology Co., Ltd.
- Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian
- Street, Longgang District, Shenzhen, Guangdong, China
- Email: product@licheng-tech.com
- Postal code: 518129
Documents / Resources
 |
inateck KB06004 Keyboard and Mouse Combo [pdf] Instruction Manual KB06004, KB06004 Keyboard and Mouse Combo, Keyboard and Mouse Combo, Mouse Combo |
 |
inateck KB06004 Keyboard and Mouse Combo [pdf] Instruction Manual KB06004-M, 2A2T9-KB06004-M, 2A2T9KB06004M, KB06004 Keyboard and Mouse Combo, KB06004, Keyboard and Mouse Combo, Mouse, Keyboard, Combo |
