Instruction Manual
KB05114 Keyboard
Product Diagram
1. Power ON/OFF KB05114
Power ON: Toggle the switch to ON.
Power OFF: Toggle the switch to OFF.
2.Pair KB05114 with a Surface Pro
Step 1: For the first time you pair KB05114 with a Surface Pro, you just need to toggle the switch on the KB05114 to “ON” position and K805114 will enter Bluetooth pairing mode automatically. To enter this mode, you can also hold 
simultaneously for 3 seconds and then the Bluetooth indicator will flash to indicate that KB05114 is under pairing mode.
Step 2: On the Surface Pro, select All Settings-Devices – Add Bluetooth or Other Device Bluetooth and then “Inateck KB05114” will show up as an available device.
Step 3: Select “Inateck KB05114” on Surface Pro
Step 4: When the blue indicator keeps on, it means that KB05114 is paired with the Surface Pro successfully.
Note: if KB05114 doesn’t work even though the blue indicator stays on, it might have been paired with other nearby computer. In this case, please follow steps in “Troubleshooting in Bluetooth Pairing” to resolve the issue.
3. Troubleshooting in Bluetooth Pairing
Step 1: Delete all the Bluetooth pairing records related to KB05114 on the Surface Pro.
Step 2: Hold 
simultaneously for 3 seconds. The 3 indicators will flash 3 times simultaneously and then the blue indicator will flash, which means that the keyboard enters Bluetooth pairing mode. Under this mode, please re-pair the keyboard with the Surface Pro.
4. LED Indicator
| Indicator | Status | Meaning |
| Charging Indicator-Red | Blinking | Low Battery, 40% |
| Solid | Charging | |
| Charging Indicator-Green | Solid | Fully Charged |
| Caps Lock Indicator-White | Solid | Caps Lock On |
| Off | Caps Lock Off | |
| Bluetooth Indicator-Blue | Solid | Bluetooth Connected |
| Off | Bluetooth Unconnected | |
| Fast Blinking | Bluetooth Pairing | |
| Slow Blinking | Bluetooth Reconnecting |
5.Keyboard Backlight
- Hold
simultaneously to adjust the backlight color. 7 colors are available in total - Hold
simultaneously to adjust the backlight brightness. 3 levels are at your choice.
Note:When the battery level is lower than 20%, the backlight turns off autornatically.
Function Keys
6.2 How to Use F1-F12
You may press the 
keys to enable/disable the 
lock. (The keyboard disables Fn lock by default.)
When the Fn lock is enabled:
Press can trigger the functionality owned by 
Press 
to dim the brightness of the screen;
This method applies to all F Keys (
)
When the Fn lock is disabled (Default Status):
Press the to dim the brightness of the screen. Press simultaneously to use the functionality owned by .
6.3 Fn+Key Combinations
 |
Check the Battery Level |
 |
Turn on/off Touch Pad |
 |
Enter Bluetooth Pairing Mode |
 |
Enable/Disable Fn Lock |
7. Restore Factory Settings
If you are unsure what settings you have made on KB05114, you may hold + simultaneously for 3 seconds to restore the factory setting.
Note: After factory reset, the keyboard would enter Bluetooth pairing mode automatically. You need to re-pair K805114 with your Surface Pro.
8.Check Battery Level
Press 
simultaneously to check the battery level when KB05114 is not being charged.
| Blinkina Frequency | Battery Level |
| Once | 0-25% |
| Twice | 25%-50% |
| Three Times | 5096-75% |
| Four Times | 754100% |
Charging
When the battery level is under 20%, the red indicator will flash. Please recharge the KB05114 in time. The recommended charging voltage is SV. To charge KB05114, you can connect the USB cable to the charger of a cellphone or the USB port of a computer. The keyboard will be fully charged after 3 hours.
Note: lt is not recommended to charge KB05114 with a fast charger.
Product Specification
| Bluetooth Version | V5.3 |
| Bluetooth Range | 10m |
| Charging Time | 2-3h |
| Operating Time (Backlight on) | About 5h |
| Operating Timet (Backlight off) | About 50h |
| Operating Temperature | -10°C -55°C |
| Bluetooth Frequency Range | 2402-2480MHz |
| Actuation Force | 60 ± lOg |
| Battery Capacity | 500mAh |
Packing List
KB05114*1
Charging Cable *1
Instruction Manual 1
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Battery Safety Warning:
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU.
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck-euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Email: service@inateck.com
Postal code: 04178
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129
Documents / Resources
 |
inateck KB05114 Keyboard [pdf] Instruction Manual 2A2T9-KB05114, 2A2T9KB05114, KB05114 Keyboard, KB05114, Keyboard |
