inateck KB04111-11 Keyboard Instruction Manual
· Product Diagram
1. Bluetooth Pairing
Step 1: Put the iPad case on and slide the keyboard switch to the On position. Hold down 
simultaneously and then the keyboard will enter pairing mode with a blinking blue indicate light.
Step 2: On your iPad, go to Settings> Bluetooth, turn on Bluetooth and then “lnateck KB04111-11” will show up in “Other Devices” .
Step 3: Tap “lnateck KB04111-11” to pair it with your iPad. The Bluetooth indicator will go off in seconds, which means that Bluetooth pairing is completed.
Note:
- Set Up Your iPad:
For better user experience, please follow steps below to set up your iPad at first use once Bluetooth pairing is completed.
Go to Settings> General> Trackpad and drag the slider to the middle of the tracking speed.
Go to Settings > General > Trackpad and turn on “Tap to Click” and “Two Finger Secondary Click” •
Go to Settings> Accessibility> Touch and turn off AssistiveTouch.
Go to Settings> General> Gestures and enable the toggle for the “Four and Five Finger Swipe” setting.
Optional Settings
Steps to stop Caps Lock changing your keyboard language:
Go to Settings> General> Keyboard > Hardware Keyboard and turn off Switch Languages using Caps Lock.
Steps to disable the double tap period shortcut:
Go to Settings> General > Keyboard > Hardware Keyboard and click the switch to turn on Shortcut. - Fix Bluetooth Pairing Problems:
Step 1: Go to Settings> Bluetooth, find “lnateck KB04111-11” in My Devices and tap the info button (D next to it, then tap “Forget This Device” . If there are multiple pairing records related to the keyboard, please clear all of them.
Step 2: Hold
simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed.
Step 3: Pair your lnateck KB04111-11 with your iPad.
2. Multi-Touch Gestures
3.Adjust the Keyboard Backlight
4.Shortcut Keys
5.LED Indicator
6.Restore Factory Defaults
Hold simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed.
7.Check Battery Level
8.Charging
When the battery level is under 20%, the battery indicator will blink in red. Please recharge the keyboard in time. The recommended charging voltage and current are 5V and 250mA respectively. To recharge the keyboard, you can connect the included USB cable to the charger of your cell phone or the USB port of a computer. The keyboard will be fully charged in 2-3 hours. The indicator will stay in red when the keyboard is charging and turn green when it’s fully charged.
9.Sleep Mode
- When KB04111-ll is left idle for 1 minutes, the backlight will turn off.
- When KB04111-ll is left idle for 30 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.
Note: Tapping the trackpad cannot wake up the keyboard.
10.Product Specification
11.Packing List
KB04111-ll *1
Charging Cable *1
Instruction Manual *1
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction transmitter.
⚠ Battery Safety Warming:
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
Charging Precautions
The power delivered by the charger must be between min [0.05] Watts required by the radio equipment, and max [1.25] Watts in order to achieve the maximum charging speed.
Service Center
Europe
F&M Technology GmbH
Tel: +49 3415199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 3415199 8413
Address: Fraunhoferstral1e 7, 04178 Leipzig, Deutschland
North America
lnateck Technology Inc
Tel: + 1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
For Product and Battery
[EC|REP]
F&M Technology GmbH
Fraunhoferstral1e 7, 04178 Leipzig, Deutschland
Tel: +49 3415199 8410
Email: service@inateck.com
Postal code: 04178
195 High Street, Office B, Great Missenden, United
Kingdom, HP16 OAL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen lnateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian
Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129
Documents / Resources
 |
inateck KB04111-11 Keyboard [pdf] Instruction Manual 2A2T9-KB04111-11, 2A2T9KB0411111, KB04111-11 Keyboard, KB04111-11, Keyboard |