in-lite App User Guide

SET UP GIRA / KNX

APP FEATURE

Setting up the in-lite app for connection to KNX

1.  First set up the in-lite system with the in-lite app. See explanation ‘pairing
   SMART BRIDGE & in-lite app’.
2. Update the in-lite Smart products. Your SMART BRIDGE does this automatically
   as soon as it is connected to the internet. In the in-lite app, you can check if:
   … the SMART BRIDGE has at least soware version 1.5.5
   … the SMART HUB has at least soware version 52
   … the Smart Lights have at least version 36 or higher
   … your in-lite app has at least version 3.15 (for both iOS and Android)
3.  In the in-lite app, go to settings and click on “SMART BRIDGE”.
4.  Click on the button: ‘Connect to KNX’. Here you will also find the required login tokens and the IP address of the SMART BRIDGE. Share these with the KNx integrator. From here the installation is up to the KNX integrator.
5.  Download the Logic Module.
6.  Ensure that an X! or L1 Gira server is installed.
7.  Open the Gira Project Assistant and upload the in-lite Logic Module.
8.  Use the pairing code from the in-lite app.
9. Refer to the manual for further instructions.

Read More About This Manual & Download PDF:

Documents / Resources

in-lite in-lite App [pdf] User Guide in-lite App, App

References

• User Manual