Quick Start Guide
V1.0.0
Bullet 2E Security Camera
- Power On the Camera
Connect the camera to power. You can choose wireless or wired network connection (see part 1). - Get the Imou Life App
Scan the QR code on part 2 or search for “Imou Life” to download and install the app. Create an account and log in. - Set Up the Camera
Scan the QR code on the body of the device or on the cover of this guide with the app, and then follow on-screen instructions to complete the setup (see part 3). - Install the Camera
Make sure the mounting surface is strong enough to hold three times the weight of the camera. For detailed installation process, please see part 4.
| LED Status | Device Status | |
| Green | Flashing | Ready to set up the device |
| Solid | Working properly | |
| Red | Flashing | Network disconnected |
| Failed to set up the device | ||
| Solid | Booting | |
| Device malfunction | ||
| Green & Red | Alternating | Updating firmware |
| Off | / | Power off |
| LED turned off | ||
If you need to reset the camera, press and hold the reset button for 10 s. The LED turns solid red when the camera is booting.
service.global@imoulife.com
httos://en.imoulife.com/support/help/faq
https://en.imoulife.com
@imouglobal
Documents / Resources
 |
IMOUS Bullet 2E Security Camera [pdf] User Guide Bullet 2E Security Camera, Bullet 2E, Security Camera, Camera |