IMOU-logo

IMOU AX3000 Wi-Fi 6 Smart Router

IMOU-AX3000-Wi-Fi-6-Smart-Router-product

1mou
AX3000 Wi-Fi 6 Smart Router
Quick Start Guide
V1.0.0

Package contents: Router x1, Power Adapter x1, Ethernet Cable x1, Quick Start Guide x2.

Connect the Device

IMOU-AX3000-Wi-Fi-6-Smart-Router- (1)

  • Power off the modem, and remove the backup battery if it uses.
  • Make sure that the router is close to a power outlet and near Ethernet cables for wired computers.
  • Place the router horizontally and orient the antennas vertically. 0 Images may differ from the actual product.

LED and Buttons

LED Patterns

IMOU-AX3000-Wi-Fi-6-Smart-Router- (2)

Reset Button
Press and hold the button for more than Ss to reset the router to its factory mode.

WPS/MESH Button
When the Mesh network is enabled, press the button for 1 s to start the Mesh process. When the Mesh network is disabled, press the button for 1 s to start the WPS process.

  1. Mesh networking is turned on by default. You can log in to the router management platform to disable it.

Set Up the Network

Method 1: Use a Web Browser

  1. Connect your device to the router wirelessly or with an Ethernet cable.
    The default Wi-Fi network name (SSID) is printed on the label at the bottom of the router.
    For security, change to a unique SSID and assign a password.
    IMOU-AX3000-Wi-Fi-6-Smart-Router- (3)
  2. Launch a web browser. Key in http://imou­wifi.net in the address bar. Read and accept the agreement and click Try Now. IMOU-AX3000-Wi-Fi-6-Smart-Router- (4)
  3. Follow the on-screen instructions to set up the Internet connection.

Method 2: Use the lmou Life App

  1. Download the lmou Life App. IMOU-AX3000-Wi-Fi-6-Smart-Router- (5)
  2. Open the lmou Life App and log in.
    If you are a new user, please register an 2. Open the lmou Life App and log in. 0 If you are a new user, please register an
  3. Add your devices. Follow the instructions on the app to complete the setup and connect to the internet. IMOU-AX3000-Wi-Fi-6-Smart-Router- (6)

Mesh Network
This router supports mesh network.
A mesh network can be configured with one main router and multiple satellite nodes.

The main router is the router you connect to the modem or the Internet access port.

Method 1: Via a Web Browser
Visit http://imouwifi.net , and log in with your ID and password. Click Mesh Network at the upper right coner and follow the step-by-step instructions to complete the setup.

IMOU-AX3000-Wi-Fi-6-Smart-Router- (7)

Method 2: Use the WPS/MESH Button

  1. Plug in all routers and power them on.
    Position the satellite nodes and the main router within 3 meters (9.84 ft).
  2. Press the WPS/MESH button on the main router to enter mesh networking process. Wait until IMOU-AX3000-Wi-Fi-6-Smart-Router- (8) indicator fiashes red.
  3. Press the WPS/MESH button on the satellite nodes within 2 minutes for them to establish a connection with the main router. Once connected, the IMOU-AX3000-Wi-Fi-6-Smart-Router- (8) indicators will turn off.

If you need to group multiple satellite nodes, please repeat step 2 and 3 for each of the nodes.
Mesh networking support up to 4 satellite nodes.

FAQ

  1. Ql: What should I do if I can’t access the router’s management page?
    • Reboot your router and try again.
    • CheckyourWi-Fi connection.
    • Use another Web browser such as Google Chrome.
    • Restart your device.
  2. Q2: What should I do if I can’t access Internet?
    • Reboot your modem and router, then try again.
    • Check the Internet is working. With an Ethernet cable connecting the modem to the computer directly.
  3. Q3: What should I do if I forget my Web management page password?
    • Check the Web password on the label at the bottom of the router.
    • When the router is power on, use a pin to press and hold the RESET button on the back until the LED blinks
      Then the password will restore to the default that marked on the label.
  4. 04: What can I do if myWi-Fi devices cannot connect overWi-Fi to the router?
    Please try to check:
    • You have enabled the router’s SSID network and it displays in yourWi-Fi client’s scanning list.
    • You have entered the correct Wi-Fi password when connecting your devices to the Wi-Fi network

If you failed to address the problem, you can reset the router to factory default settings.

IMOU-AX3000-Wi-Fi-6-Smart-Router- (9)For the user guide, support, and more information, please visit https://www.imoulife.com/support
IMOU-AX3000-Wi-Fi-6-Smart-Router- (10) Email service.global@imoulife.com to give suggestions.
IMOU-AX3000-Wi-Fi-6-Smart-Router- (11) Follow @imouglobal to get more brand information.

Documents / Resources

IMOU AX3000 Wi-Fi 6 Smart Router [pdf] User Guide
AX3000 Wi-Fi 6 Smart Router, Wi-Fi 6 Smart Router, Smart Router, Router

References

Leave a comment

Your email address will not be published. Required fields are marked *