I25D02 Swan 2 POS Device
“
Product Information
Specifications
- Model: I25D02
- Options:
- 15.6 LCD
- 15.6 LCD + 10.1 LCD
- 15.6 LCD + 15.6 LCD
- OS: Not specified
- CPU: Not specified
- Main LCD Display: 15.6 inches
- Vice LCD Display: 10.1 inches or 15.6 inches
- Storage: Not specified
- NFC: Yes
- Wi-Fi: Yes
- Bluetooth: Yes
- Speaker: Yes
- External Interface:
- RJ12 Port
- USB Ports
- Micro USB Diagnostic
- Serial Jack
- DC-In Jack
- RJ45 Port
- HDMI Port
- Earphone Jack
- Operating Temperature: Not specified
- Storage Temperature: Not specified
- Operating Humidity Limit: Not specified
- Altitude Limit: Not specified
Product Usage Instructions
To start up the device, short press the power button when the
machine is in power-off mode. For power off or restart, long press
the button for 2-3 seconds to choose the desired option when the
machine is in power-on mode. An alternative way to power off is to
press the button for 11 seconds when the machine is in power-on
mode.
Installation Steps:
- Align the notches and fit the device into the base.
- Secure it with screws.
- Connect the power adapter.
- Turn on the power.
FAQ (Frequently Asked Questions)
Q: What should I do if the device does not power on?
A: Make sure the power adapter is properly connected and try a
different power outlet. If the issue persists, contact customer
support for assistance.
Q: How can I clean the device screen?
A: Use a soft, dry microfiber cloth to gently wipe the screen.
Avoid using harsh chemicals or abrasive materials that may damage
the display.
“`
Swan 2 POS Device Model: I25D02
User Manual
This device has the following options:
15.6″ LCD
15.6″ LCD + 10.1″ LCD
15.6″ LCD + 15.6″LCD
Introduction
Power Button External Module
External Module LCD Display TF Card Slot Coverture
RJ12 Port USB Port
Micro USB Diagnostic
Serial Jack
DC-In Jack RJ45 Port USB Port HDMI USB Port Earphone Jack
LCD Display Provide touch screen for operator.
Power Button Start up: Short press on button when machine is in power off mode Power off/ restart: Long press on button 2-3 seconds to choose either option when machine is in power-on mode. Power off (alternative): Press button for 11 seconds when machine is in power-on mode.
Installation Step
Align the notche and fit the device into the base. Secure it with screws, connect the power adapter and turn on the power.
Technical Specifications
OS CPU Main LCD Display Vice LCD Display Storage NFC Wi-Fi Bluetooth Speaker
External Interface
External SD Card Power Adapter Operating Temperature Storage Temperature Operating Humidity Limit Altitude
iMin ROM base on Android 15(64 bit) Octa-core (Dual-core Cortex-A76 + Hexa-core Cortex-A55) 2.0GHz 15.6 inches, resolution: 1920 x 1080, multi-touch capacitive screen 10.1 inches, 1280 x 800 / 15.6 inches, 1920 x 1080 4GB RAM (optional 8GB) + 64GB ROM (optional 128GB) Yes 802.11 a/b/g/n/ac/ax 5.4BLE 1 x 1.5W 4 x USB Type-A 2.0, 1 x USB Type-A 3.0, 1 x USB Type-C, 1 x RJ45, 1 x RJ12, 1 x RJ11, 1 x Earphone, 1 x HDMI 2.0, 1 x DC-in MicroSD (TF) up to 1TB Output power 36W, Input: AC100~240V, Output: DC24V/1.5A -10 to +50 -20 to +60 5% to 95% r.H. Max.3500 meters
Safety Information
Safety and Handling
· Please plug-in power adapter to only its corresponding AC socket. · Do not use in explosive gas atmosphere. · Do not disassemble the equipment. It should be serviced or recycled only by an authorised service provider. · This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices. · About the battery replacement: 1. Do not attempt to replace the battery yourself – you may
damage the battery, which could cause overheating, fire and injury. 2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by an authorised service provider, and must be recycled or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions: · Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual. · We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products. · The operating system of this product is supported by official regular OS update. If the user breached the third party’s ROM system or change the system file by hacking, it may cause unstable, undesired system operation and bring security risk.
Advices
· Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog. · Do not use the device in extreme cold or hot environments eg, near a fire or lit cigarette. · Do not topple, throw, or bend. · Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device. · Do not at tempt to use the device near medical equipment
Important Safety Information
· Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit. · If you find unusual odour, overheating or smoke, please cut off the power immediately. · Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.
Disclaimer
Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
 |
imin I25D02 Swan 2 POS Device [pdf] User Manual 2AYD5-I25D02, 2AYD5I25D02, I25D02 Swan 2 POS Device, I25D02, Swan 2 POS Device, POS Device, Device |