imin I24M01 Swift 2 Ultra POS Device
Product Usage Instructions
Power On/Off
- To power on the device, press and hold the Power Button. To power off, press and hold the Power Button, then confirm on the screen.
Volume Control
- Adjust the volume using the Volume Button located on the side of the device.
Display
- The display provides visual feedback and information. Touch the screen to interact with the device.
Introduction
Strap Optional
Technical Specifications
| OS | Android 13 |
| CPU | Octa-core (Dual-core Cortex-A76 2.2GHz + Hexa-core Cortex-A55 2.0GHz) |
| Screen | 6.517 inches LCD screen , 720 x 1600, Capacitive multi-touch panel |
| Storage | 4GB RAM + 64GB ROM |
| Camera | 2 MP front camera (optional, default to none), 5 MP rear camera, with flash light |
| NFC | Support |
| PSAM | Optional |
| Wi-Fi | 802.11 a/b/g/n/ac |
| Bluetooth | BT5.2 |
| Printer | 58mm thermal printer, supports the paper roll with a maximum 50mm diameter |
| Speaker | 1W |
| External Interface | 1 x USB Type-C port |
| Card Slot | 1 x Nano SIM + 1 x TF + 1 x PSAM (optional, default none) |
| Network | 2G/3G/4G |
| GPS | GPS/Galileo/Glonass/Beidou |
| Battery | 7.7V 3350mAh |
| Power Adapter | 9V/2.22A |
| Charging Temperature | -10℃ to +40℃ |
| Operating Temperature | -10℃ to +50℃ |
| Storage Temperature | -20℃ to +60℃ |
| Operating Humidity | 5% to 95% r.H. |
| Limit Altitude | Max.3500 meters |
| Extended Support | Charging Dock (optional) |
Safety Information
Safety and Handling
- Please plug the power adapter into only its corresponding AC socket.
- Do not use in an explosive gas atmosphere.
- Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorised service provider.
- This is a Grade B product. The product may cause radio interference and interfere with medical devices.
- The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
About the battery replacement:
- Do not attempt to replace the battery yourself – you may damage the battery, which could cause overheating, fire, and injury.
- The replaced/ used battery should be disposed of according to local environmental laws and guidelines.
- Do not dispose in f ire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions:
- Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk, as specified in this instruction manual.
- We will not be responsible for any damage or problem caused by third-party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products.
- The operating system of this product is supported by official regular OS updates. If the user breaches the third party’s ROM system or changes the system file by hacking, it may cause unstable, undesired system operation and bring a security risk.
Advices
- Do not expose the device to moisture, dampness, or wet weather, such as rain, snow, or fog.
- Do not use the device in extreme cold or hot environments, eg, near a fire or lit cigarette.
- Do not topple, throw, or bend.
- Use in an optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
- Do not attempt to use the device near medical equipment.
Important Safety Information
- Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury, or death in the event of a thunder or lightning hit.
- If you find an unusual odour, overheating, or smoke, please cut off the power immediately.
- Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.
Disclaimer
- Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as the current standard.
- The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice.
FCC Statement
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This POS Device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of the USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: The POS Device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the POS Device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 mm separation distance between the user’s body and the back of the POS Device. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.
- imin Technology Pte Ltd Address: 11 Bishan Street 21 #03-05 Singapore 573943
- TEL: +65 67413019
- FAX: +65 67413989
- URL: www.imin.sg
FAQ
- Q: How do I insert a SIM card?
- A: Locate the SIM Card Slot on the device, gently insert the SIM card with the metal contacts facing down, and push it in until it clicks into place.
- Q: How do I charge the device?
- A: Connect the Power Adapter to the Type-C port on the device and plug it into a power source. The device will start charging automatically.
Documents / Resources
 |
imin I24M01 Swift 2 Ultra POS Device [pdf] User Manual 2AYD5-I24M01, 2AYD5I24M01, I24M01 Swift 2 Ultra POS Device, I24M01, Swift 2 Ultra POS Device, Ultra POS Device, POS Device, Device |