imation IMMC100 Charging Dock

Product Specifications:

• Rated Input: 5V 0.5A
• Interface: USB 2.0
• Operational Temperature: 0 to 70 degrees Celsius
• Physical Dimension (LxWxH): 80mm x 80mm x 107mm
• Weight: 106.3g

Product Usage Instructions

Connecting the Charging Dock:

1. Connect your PC and Imation Charging Dock using the Type-C cable located at the bottom of the dock.
2. Attach a wireless receiver to the bottom of the Imation Charging Dock.
3. Plug the magnetic unit into your MX series mouse charging port (Type-C).
4. Place your MX series mouse on the Imation Charging Dock. The dock will start charging your mouse automatically.

Precautions:

• Do not strike, bend, drop, wet, or apply excessive force to the Imation Charging Dock IMMC to avoid data loss or damage.
• Avoid disassembling or damaging the Imation Charging Dock IMMC, as it will void all warranties.

Changing LED Lighting Modes:
You can change the LED lighting by pressing the button on the dock. The available modes are:

• Breathing Mode
• Wave Mode
• Night Mode
• Off Mode

Button LED:
Press the button on the dock to cycle through different LED modes.

Frequently Asked Questions

Q: What is the warranty policy for the Imation Charging Dock IMMC?

A: The Imation Charging Dock IMMC is covered by a limited warranty for a specific period from the original purchase date. For warranty service, please refer to Imation's warranty policy guidelines.

Q: How can I get warranty service if my product fails under normal use?

A: If your product fails under normal use within the warranty period, contact Imation for proper warranty service procedures.

Q: Can I change the LED modes on the Charging Dock?

A: Yes, you can change the LED lighting modes on the Charging Dock by pressing the button to cycle through different options.

Components

How to connect

1. Connect PC & Imation Charging Dock with Type-C cable on the bottom of Imation Charging Dock
2. Connect a wireless receiver on the bottom of Imation Charging Dock
3. Plug a magnetic unit at your MX series mouse charging port ( Type-C )
4. Place your MX series mouse on Imation Charging Dock. Imation Charging Dock will start charging your mouse automatically.

Precautions

1. Do not strike, bend, drop, wet, or apply excessive force to the  imation Charging Dock IMMC100,
   This may cause data losses or damages to the product
2. Do not disassemble or damage the Imation Charging Dock IMMC100, if Imation Charging Dock IMMC100 has been disassembled by the user, all warranties will be void.

Warranty Policy

• imation Charging Dock IMMC100 is covered by a 1-year limited warranty from the original purchase date.
• Under the terms of imatoin warranty policy. imatoin will provide proper warranty service product fails under normal use.
• For the products that are out-of-warranty period hereunder.
• Product customer service will be varied by region or country if the product service is not available. Please contact resellers.

Warranty Limitations
The warranty stated herein does not apply if any product failure caused by

1. Acts of improper use such as prolonged exposure to
2. Malfunctions of other equipment
3. Acts of nature
4. Defects or damages from moving or dripping after purchase
5. Damaged connector or cable ‒ Operational Humidity: RH 70% / Temperature: 0~70℃

Warning and Precautions
imation is not responsible for any cost caused by defects or damages of products from misuse or neglect

Compatibility

• MASTER 3S, MASTER 3S for Mac
• ANYWHERE 3S, ANYWHERE 3S for Mac

Product Specification

• Rated Input 5V= 0.5A
• Interface USB 2.0
• Operational Temperature 0℃ to 70℃
• Physical Dimension(LxWxH) 80mm x 80mm x 107mm
• Weight 106.3g

LED Light

You can change the LED lighting by pressing the button (changes sequentially).

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules.

Documents / Resources

imation IMMC100 Charging Dock [pdf] User Guide 2A3ZZ-IMMC100, 2A3ZZIMMC100, IMMC100 Charging Dock, IMMC100, Charging Dock, Dock

References

• User Manual