Ikuu SSWMPIR-WIFI Combination Sensor Instructions

Ikuu SSWMPIR-WIFI Combination Sensor Instructions

Contents hide

1 Features

2 Technical Specifications

3 Included Accessories

4 Wiring Diagram

5 Documents / Resources

5.1 References

6 Related Posts

Features

Wi-Fi (No hub required)
Integrated with PIR/LUX/Temperature/Humidity sensor

Neutral required
Blue LED to indicate switch status

Retrofit to standard mounting brackets
White, UV resistant material

Scene control via the app
Works with both Amazon Alexa and Google Assistant

3 year in-home warranty

Network/Device Requirements

Connectivity	Wi-Fi
Requirements	Existing 2.4GHz Wi-Fi network
Protocol	IEEE 802.11 b/g/n
Wireless Frequency	2.4GHz
App Requirements	Mobile device running iOS or Android.(Refer to ikuu.com.au for minimum specs)

Technical Specifications

Neutral Required	Yes
Supply Voltage	250V a.c. 50Hz
Standby Wattage	<1W
Operating Load	LED: 400WIncandescent (Halogen): 1500W Motor Rating: M40
Rated AmbientTemperature	25°C
IP Rating	IP20 (Indoor use only)
Terminal Size	6mm²(can fit up to 3 x 2.5mm² wires per terminal)
Colour	White
Rear Colour	Yellow
Housing Material	Polycarbonate
Contact Material	Brass
Weight	160g
Dimensions	115mm x 74mm x 44mm
Cut-out Dimensions	80mm x 50mm
Mounting Centres	84mm
Compliance / Standards	AS/NZS 4268, AS/NZS 60669.1,AS/NZS 60669.2.1, AS/NZS 2772.2,CISPR 15, CISPR 32

Included Accessories

Faceplate, Cut-out template, Mounting screws

Wiring Diagram

This product is valid for 3 years in-home warranty from the date of purchase. Please retain proof of purchase and
certificate of compliance from the installation to make a claim. Please visit https://www.mercator.com.au/productsupport/warranty for more information. For Mercator Ikuü contractor or end consumer support please visit www.ikuu.com.au or contact our customer service team on 1300 552 255 or via email at customercare@mercator.com.au