IKEA TONSTAD Kitchen Table Installation Guide

IKEA TONSTAD Kitchen Table

IKEA-TONSTAD-Kitchen-Table-fig-1

Product Specifications

  • Model: TONSTAD
  • Document Number: AA-2506002-4
  • Revision Date: 2024-05-20 (Note: The document also shows 2026-05-20, but 2024-05-20 appears to be the current revision date)
  • Manufacturer: Inter IKEA Systems B.V.

Included Components:
Please verify all parts are present before beginning assembly.

  • 10116225: 4x
  • 130886: 8x (used in steps 2, 3, 5)
  • 130884: 8x (used in steps 2, 3, 5)
  • 100712: 16x (used in step 9)
  • 100843: 16x (used in step 9)
  • 107271: 4x (used in step 10)
  • 154409: 8x (used in step 7)
  • 100038: 4x (used in step 7)
  • 120202: 1x (used in step 8)
  • 110912: 14x (used in step 8)
  • 101350: 8x (used in step 6)

Product Usage Instructions

Follow these steps carefully to assemble your TONSTAD product. Refer to the diagrams for visual guidance.

  • Step 1: Initial Setup
    Gather all components and tools. Ensure you have a clear, flat workspace.
  • Step 2: Attach Components (Part 1)
    Locate the 4x component labelled 10116225. Attach 4x of component 130886 and 4x of component 130884 as shown in the diagram.
  • Step 3: Attach Components (Part 2)
    Continue by attaching the remaining 4x of component 130886 and 4x of component 130884 as indicated in the diagram.
  • Step 4: Secure Connections
    Ensure all connections made in steps 2 and 3 are secure.
  • Step 5: Attach Components (Part 3)
    Attach the remaining 4x of component 130886 and 4x of component 130884 to the structure as shown.
  • Step 6: Install Component 101350
    Take the 8x components labelled 101350 and install them into the designated slots as depicted in the diagram.
  • Step 7: Install Components 154409 and 100038
    Attach the 14x components labelled 154409 and 4x components labelled 100038 according to the illustration.
  • Step 8: Install Components 110912 and 120202
    Insert the 4x components labelled 110912 and the 1x component labelled 120202 as shown in the diagram.
  • Step 9: Install Components 100712 and 100843
    Attach the 4x components labelled 100712 and 4x components labelled 100843 to their respective positions.
  • Step 10: Install Component 107271
    Finally, attach the 4x components labelled 107271 as the last step of the assembly.
  • Step 11 & 12: Final Checks
    Review all connections to ensure they are tight and secure. The assembly is now complete.

Product Troubleshooting

  • Missing Parts: If any parts are missing, please re-check the packaging thoroughly. If still missing, contact IKEA customer service with the document number AA-2506002-4 and the part number.
  • Loose Connections: If the product feels wobbly, re-tighten all screws and fasteners. Do not overtighten.
  • Difficulty Assembling: Ensure you are using the correct parts for each step. Refer to the part numbers and quantities listed in the specifications. Sometimes, parts may look similar but are intended for different steps.
  • Damaged Parts: If any component is damaged upon opening the package, do not proceed with assembly. Contact IKEA customer service for a replacement.

Tools Required

IKEA-TONSTAD-Kitchen-Table-fig-2

Hardware List

IKEA-TONSTAD-Kitchen-Table-fig-3

Assembly Instruction

IKEA-TONSTAD-Kitchen-Table-fig-4
IKEA-TONSTAD-Kitchen-Table-fig-5
IKEA-TONSTAD-Kitchen-Table-fig-6
IKEA-TONSTAD-Kitchen-Table-fig-7
IKEA-TONSTAD-Kitchen-Table-fig-8
IKEA-TONSTAD-Kitchen-Table-fig-9
IKEA-TONSTAD-Kitchen-Table-fig-10

Documents / Resources

PDF thumbnailTONSTAD Kitchen Table
Installation Guide · 00593879, AA-2506002-4, 10116225, 130886, 130884, 100712, 100843, 154409, 100038, 120202, 110912, 101350, 107271, TONSTAD Kitchen Table, TONSTAD, Kitchen Table, Table

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.