IKEA TONSTAD Extendable Table Assembly
Specifications
| Specification | Details |
|---|---|
| Brand | IKEA |
| Product Series | TONSTAD |
| Product Name | Extendable Table |
| Product Type | Extendable Dining Table |
| Designer | Ola Wihlborg |
| Available Finishes | Off-White, Oak Veneer, Brown-Stained Oak Veneer |
| Small Table Length | 80–120 cm |
| Large Table Length | 140–196 cm |
| Small Table Width | Approximately 70 cm |
| Large Table Width | Approximately 85 cm |
| Table Height | Approximately 75 cm |
| Small Table Seating Capacity | 2–4 People |
| Large Table Seating Capacity | 4–6 People |
| Extension Mechanism | Manual |
| Extension Leaf | 1 Self-Storing Leaf |
| Tabletop Material | Particleboard |
Assmebly Instruction
Hardware
Assembly Steps
Step 1, Step 2
Step 3
Step 4
Step 5, Step 6
Step 7
Step 8, Step 9
Step 10, Step 11
Step 12
Step 13
Step 14
Step 15
Step 16, Step 17
Step 18, Step 19
Step 20, Step 21
Step 22
Package Includes
The IKEA TONSTAD Extendable Table is supplied as flat-packed furniture. The package includes components required for the selected table configuration.
- Main Tabletop Sections
- Self-Storing Extension Leaf
- Wooden Table Legs
- Side Rails
- Cross Rails
- Extension Mechanism Components
- Tabletop Connecting Hardware
- Assembly Screws and Fittings
- Supporting Brackets and Connectors
- IKEA Assembly Instructions
The exact hardware quantities depend on the selected article number. A suitable screwdriver or bit screwdriver is required for assembly and may need to be purchased separately.
Maintenance and Cleaning
- Regular Cleaning: Wipe the tabletop with a soft cloth dampened with water and mild cleaning detergent.
- Drying: Use a clean, dry cloth to remove moisture after cleaning.
- Spill Removal: Wipe away food spills and liquids promptly to prevent surface damage.
- Extension Mechanism Cleaning: Keep the accessible sliding components free from dust and debris.
- Fastener Inspection: Check the assembly screws and connectors regularly. IKEA recommends retightening the screws approximately two weeks after assembly and whenever necessary.
- Surface Protection: Use suitable placemats or coasters to protect the tabletop from scratches, stains, and excessive heat.
- Wooden Leg Maintenance: Wipe the legs with a soft cloth and inspect them periodically for damage.
- Avoid Abrasive Cleaners: Do not use rough cleaning pads, strong solvents, or aggressive chemicals.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table Wobbles | Uneven floor or loose leg fasteners | Check floor stability and secure the leg fittings |
| Extension Does Not Open | Obstruction or incorrect assembly | Remove obstructions and inspect the mechanism |
| Tabletop Sections Do Not Align | Extension components incorrectly positioned | Recheck the assembly and tabletop alignment |
| Extension Leaf Does Not Fit | Incorrect positioning | Follow the illustrated extension procedure |
| Extension Leaf Is Difficult to Remove | Incorrect storage position or obstruction | Check the storage compartment and remove obstructions |
| Table Does Not Close Properly | Extension leaf or mechanism not correctly positioned | Verify the folding and storage arrangement |
| Table Makes Creaking Sounds | Loose assembly fittings | Inspect and retighten the screws |
| Tabletop Appears Uneven | Incorrect assembly or extension alignment | Recheck the supporting frame and tabletop sections |
| Legs Become Loose | Fasteners require tightening | Retighten according to the assembly instructions |
Documents / Resources
 | TONSTAD Extendable Table |
References
- User Manualmanual.tools
Published: October 20, 2026