IKEA RONNINGE Bar Table Instruction Manual

To assemble the IKEA RÖNNINGE Bar Table, follow these primary steps based on the instruction manual:

1. Frame Preparation: Lay the four side rails on a soft surface. Attach the corner brackets (part #122483) to the rails using screws (#100325).
2. Tabletop Attachment: Place the tabletop face down. Position the assembled frame onto the tabletop and secure it using the long screws (#10056782).
3. Leg Preparation: Insert the threaded rods (#100033) into the top of each leg, securing them with the internal sleeves (#110912).
4. Crossbar Assembly: Assemble the H-shaped footrest/crossbar by connecting the three pieces using the specialized connector (#112996) and cam locks (#103430).
5. Final Assembly:
   • Insert the legs into the corner brackets of the table frame.
   • Fit the H-shaped crossbar into the pre-drilled holes on the legs.
   • Secure the legs to the frame using washers (#100843) and nuts (#100712) with the provided wrench tool (#120202).
   • Secure the crossbar to the legs using the long bolts (#104558) and the Allen key (#100092).
6. Finishing: Press the plastic feet (#117559) into the bottom of each leg.

Note: The user referred to this as a "Roman computer table," but these instructions are specifically for the RÖNNINGE bar table model.