Assembly Instructions
Australia English Hosted copyBACKSJÖN
BACKSJÖN wash-basin with water trap, white, 80x48 cm Browse 3 IKEA PDFs for article 795.276.07.
Assembly instructions and product documents
Assembly Instructions
Australia English Hosted copy
Assembly Instructions
Australia English Hosted copy
Product PDF
Australia English Hosted copyProduct information
Helpful product notes from available IKEA product data, shown after the instruction files so assembly documents stay first.
Made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives the wash-basin a clean and modern look.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with a mixer tap of your choice, sold separately.
10 year guarantee. Read about the terms in the guarantee brochure.
Comprises: 1 wash-basin and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Wash-basin mixer taps from our range and from other manufacturers can be mounted on this wash-basin.
Fits HAVBÄCK, ÄNGSJÖN, TÄNNFORSEN and HEMNES wash-stands.
Silicone is needed for installation, not included.
Waste outlet pipe diameter: 1 11/16" (43 mm).
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
The washbasin should not come in contact with ammonia, acids, strong detergents, hair dye or chlorine.