Assembly Instructions
US English Hosted copyBACKSJÖN
BACKSJÖN sink with water trap, white, 241/8x21" Browse 2 IKEA PDFs for article 295.170.07.
Assembly instructions and product documents
Assembly Instructions
US English Hosted copy
Assembly Instructions
US English Hosted copyProduct information
Helpful product notes from available IKEA product data, shown after the instruction files so assembly documents stay first.
Made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives the wash-basin a clean and modern look.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with a mixer tap of your choice, sold separately.
10-year Warranty. Read about the terms in the warranty brochure.
Comprises: 1 sink and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Faucets from our range and from other manufacturers can be mounted on this sink.
Fits HAVBÄCK, ÄNGSJÖN, TÄNNFORSEN and HEMNES washstands.
Silicone is needed for installation, not included.
Waste outlet pipe diameter: 1 1/2" (38.1 mm).
Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
The sink should not come into contact with ammonia, acids, strong detergents, hair dye or chlorine.