BACKSJÖN 295.754.03 Assembly Manual

Product details

The rim of the wash-basin lies above the countertop (sold separately) while the rest sits below. This solution creates valuable counterspace for bathroom essentials.

Made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives the wash-basin a clean and modern look.

Use the space on the wash-basin to place toothbrush holder and soap dispenser.

To enhance your style, pair with a countertop and mixer tap of your choice, sold separately.

10 year guarantee. Read about the terms in the guarantee brochure.

Comprises: 1 wash-basin and 1 water trap.

Chrome-finish wash-basin pop-up plug and overflow kit included.

If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

Wash-basin mixer taps from our range and from other manufacturers can be mounted on this wash-basin.

Use the included template when attaching the wash-basin to the countertop.

Fits HAVBÄCK, ÄNGSJÖN and TÄNNFORSEN wash-stands, minimum width 60 cm.

To be completed with a countertop, sold separately.

Silicone is needed for installation, not included.

Waste outlet pipe diameter: 32 mm (1 1/4") / 40 mm (1 5/8").

IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com

Materials and care

Material

Basematerial: Polyester/crushed marble, Polyester
Cover/ Spring: Stainless steel
Cover cap/ Mechanism: Acetal plastic
Sealing ring: Synthetic rubber
Cover cap: Polycarbonate/ABS plastic
Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector: Polypropylene plastic
Sealing ring/ Gasket/ Seal: Synthetic rubber
Waste pipe: Synthetic rubber, Polypropylene plastic
Strainer: Stainless steel
Seals: Polyethylene foam
Assembly tool: ABS plastic