IKEA HONEFOSS Design Self Adhesive Mirror Instructions
Self-adhesive mirror
Note: The surface can be damaged when removing the mirror from the wall.
The mirror fix to most surfaces which are even.
Fixing mirror to ceilings and sloping ceilings is not recommended.
On porous surfaces like plywood and fibreboard, adhesion can be improved if the surface is first coated with high-gloss lacquer.
Wipe the wall surface so that it is clean and dry before fixing the mirror.
Wipe the back of the mirror so that it is clean and dry before sticking the tape on it.
Position and fix the tape according to the illustration in the assembly instruction.
Remember to position and fix the mirror correctly from the start since the tape cannot be reused.
The mirror may break when removing it from the wall.
Our mirrors come with a safety film on the back to minimize damage in case the glass breaks. Be careful.
Documents / Resources
 |
IKEA HONEFOSS Design Self Adhesive Mirror [pdf] Instructions HONEFOSS, HONEFOSS Design Self Adhesive Mirror, Design Self Adhesive Mirror, Self Adhesive Mirror, Adhesive Mirror, Mirror |
