HEMNES Solid Pine Desk
Assembly Instructions
This document provides assembly instructions for a furniture item, including safety guidelines, parts lists, hardware lists, and step-by-step assembly procedures.
Specifications
| Component | Max Weight Capacity |
| Main Item | 150 LBS (68 KG) |
| Shelf/Drawer | 11 LBS (5 KG) |
| Other | 22 LBS (10 KG) |
Quick Guide
Read all instructions before beginning. Ensure all parcels are received. Assembly by two people is recommended. Use the parts and hardware lists to identify and separate components. Save all packing materials until assembly is completed.
ASSEMBLY INSTRUCTIONS
Important Safety Instructions:
- ● Please read all instructions before beginning assembly
- ● Please make sure receive all the parcels to start the assembly
- ● For your safety and convenience, assembly by two people is recommended
- ● Use the parts and hardware lists to identify and separate each of the components included
- ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware
- ● Please read all instructions before beginning assembly
- ● Please make sure receive all the parcels to start the assembly
- ● For your safety and convenience, assembly by two people is recommended
- ● Use the parts and hardware lists to identify and separate each of the components included
- ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware
THANK YOU FOR PURCHASING
PARTS LIST
| 1 X1 | 2 X1 | 3 X1 | 4 X1 | 5 X1 |
| 6 X1 | 7 X1 | 8 X1 | 9 X1 | 10 X1 |
| 11 X1 | 12 X1 | 14 X1 | 15 X1 | 16 X1 |
| 17 X1 | 18 X1 |
Maximum weight capacities
MAXIMUM WEIGHT: 150 LBS (68 KG)
MAXIMUM WEIGHT:
11 LBS (5 KG)
MAXIMUM WEIGHT:
22 LBS (10 KG)
HARDWARE LIST
| Name | Part | Qty. | Spare |
|---|---|---|---|
| A |
|
11 | 1 |
| B |
|
11 | 1 |
| C |
|
18 | 1 |
| D |
|
4 | |
| F |
|
1 | |
| G |
 7/8″ Bolt |
1 | 1 |
| H |
|
2 |
| Name | Part | Qty. | Spare |
|---|---|---|---|
| I |
 2-3/8″ Screw |
18 | 1 |
| J |
 1/2″ Screw |
4 | |
| K |
 2″ Screw |
5 | 1 |
| L |
 1-1/2″ Screw |
4 | |
| M |
 9/16″ Screw |
2 | |
| O |
 2″ Screw |
2 |
STEP 1
| Part | Quantity | Description |
|---|---|---|
| C | 9pcs | Wooden dowel |
| A | 2pcs | Cam bolt |
Prepare the wooden components by inserting hardware as follows:
- Part 5: Insert 2 wooden dowels (C) into each end (4 total).
- Part 4: Insert 2 wooden dowels (C) into the top edge.
- Part 3: Insert 2 wooden dowels (C) into the top edge and 1 cam bolt (A) into the side. Tighten cam bolt (A) with a screwdriver.
- Part 11: Insert 1 wooden dowel (C) into one end.
STEP 2
An assistant is required.
| Part | Quantity | Description |
|---|---|---|
| K | 4pcs | Long wood screw |
| I | 4pcs | Long bolt |
Assemble the main frame by connecting the side panels to the horizontal rails:
- Connect Part 3 to Part 5 and Part 6 using 4 screws (K).
- Connect Part 4 to Part 5 and Part 6 using 4 bolts (I).
STEP 3
An assistant is required.
K
x 1pc
I
x 1pc
STEP 4
C
x 9pcs
STEP 5
| Item | Quantity | Image |
|---|---|---|
| I | 1pc |
Image: A long screw with a flat head and a threaded shaft. |
- Attach board (10) to the raw edge of panel (7) using screw (I).
Finished Side
7
Raw edge
10
Image: Diagram for Step 5 showing board (10) being attached to the raw edge of panel (7) with screw (I). The finished side of panel (7) is also labeled.
STEP 6
| Item | Quantity | Image |
|---|---|---|
| B | 2pcs |
Image: A cam lock hardware component. |
- Attach board (8) to frame component (3) using cam locks (B).
3
8
Image: Diagram for Step 6 showing board (8) being attached to frame component (3).
- 1 Image: Diagram 1: Insert bolt into the hole.
- 2 B Image: Diagram 2: Insert cam lock (B) into the hole.
- 3 Tighten Image: Diagram 3: Tighten the cam lock using a screwdriver.
STEP 7
| Part | Quantity |
|---|---|
| Ⓘ | x 4pcs |
STEP 8
| Part | Quantity |
|---|---|
| Ⓘ | x 8pcs |
STEP 9
|
A |
x 9pcs |
STEP 10
|
B |
x 9pcs |
|
O |
x 2pcs |
With assistant carefully stand unit up.
3 Tighten
STEP 11
| Hardware | Description | Quantity |
|---|---|---|
| D | Wooden Dowel | 4 pcs |
STEP 12
STEP 13
H
x 2pcs
M
x 2pcs
Do not use power screw driver,
use manual screw driver.
STEP 14
J
x 4pcs
L
x 4pcs
Do not use power screw driver,
use manual screw driver.
STEP 15
| Part Label | Quantity | Image |
|---|---|---|
| F | 1pc |
Image: Bracket F |
| G | 1pc |
Image: Screw G |
STEP 16
- -Move unit to final location.
- -Adjust drawer fronts as shown below.
- Step1–Loosen screws on back of drawer front brackets as shown.
- Step2–Position drawer front as required.
- Step3–Tighten screws while holding drawer front in position.
DRAWER FRONT VIEW
|
Image: Diagram showing centered drawer front alignment. |
Image: Checkmark icon indicating correct alignment. |
|
Image: Diagram showing off-center drawer front alignment. |
Image: X icon indicating incorrect alignment. |
STEP 1.
Image: Diagram showing a screwdriver loosening a screw on the bracket with a counter-clockwise arrow.
STEP 2.
Image: Diagram showing the drawer front bracket with multi-directional arrows indicating the range of motion for adjustment.
STEP 3.
Image: Diagram showing a screwdriver tightening a screw on the bracket with a clockwise arrow.
Troubleshooting
No troubleshooting information is available in the provided text.
Documents / Resources
 | HEMNES Solid Pine Desk |
References
- User Manualmanual.tools