Igloo DBX1 Deadbolt Go Smart Lock
SPECIFICATION
- Part No.: S033-100025-00
- Paper Dimensions: 215.9 x 279.4 mm double-sided (Letter paper format)
- Material: 50gsm Matte paper
What’s Included
INSTALLATION
- Remove existing deadbolt from your door.
- Install deadbolt latch into the door ensuring alignment as shown, with “UP” towards top.
- If required, increase the length of the deadbolt by twisting it before inserting into door.
- Assemble the keypad body.
The tailpiece should be in the horizontal orientation.
- Insert cable through hole in the mounting plate. Fasten it to the keypad body with 2 x “H” screws.
- Remove battery cover. Connect cable to thumbturn body.
- Fasten thumbturn body to mounting plate with the 3 x “I” screws and fold cable into empty space inside body.
- Rotating the thumbturn should lock & unlock the deadbolt with ease. Adjust/Install the strike & dust box if needed.
- Insert 4 x AA batteries (not included) and replace the battery cover.
- Long press the lock button and your lock will automatically calibrate to the left or right side of the door.
Congrats! You have installed your lock.
Download the igloohome pplication from the App tore or Google Play Store to you latest a configure
Learn more through our online manuals and support portal: https://go.igloohome.co/DBXsupport
Contact Us.
support@igloohome.co
+65 3129 2464 (Singapore)
+1 929 224 0688 (USA)
Documents / Resources
 |
Igloo DBX1 Deadbolt Go Smart Lock [pdf] Installation Guide DBX1 Deadbolt Go Smart Lock, DBX1, Deadbolt Go Smart Lock, Go Smart Lock, Smart Lock |