iGET MP5 REMOTE CONTROLLER User Guide

iGET MP5 REMOTE CONTROLLER

Function

1. This product needs to be used with panel. When using the product for the first time or replacing the panel, it needs to be enrolled with the panel.
2. This product has a low voltage reminder function. When the product battery voltage is low, the scenario button will send a low voltage reminder to the panel.

Warranty + safety notices

• a) Do not place any heavy or sharp objects on the device.
• b) Do not expose the device to direct sunlight and heat, and both must not be covered.
• c) Do not expose the device to an environment with a temperature higher or lower than the recommended temperature.
• d) Do not expose the device to a dusty and humid environment over 85% including rain and liquids (except for outdoor cameras).
• e) Do not use any corrosive cleaning agents to clean the device.
• f) Do not expose the device to strong magnetic or electronic interference.
• g) Do not use any power adapters other than those included with the device. The supplied power supply can only be connected to an electrical outlet whose voltage corresponds to the information on the type plate of the power supply.
• h) Do not leave the power adapter in places with low combustion temperatures and on parts of the human body, as the adapter heats up and may cause injury.

Packing List

Appearance & Feature

Specification

Add Device

1. Alarm panel must be already added to application iGET M6.
2. In app click “+” > “Add Device” > “Scan Device QR Code” and follow the prompts for subsequent operations.
3. Open the bottom cover of the product by turning it counterclockwise as shown in the illustration and remove the battery insulating strips.
4. Press and hold down the “Disarm” and “Arm” buttons at the same time to enter the sub-device enrolling mode, and the green LED will flash quickly.
5. Wait for the remote controller to be added successfully; the panel will emit a “ding-dong” sound when it is successful. If the sub-device fails to be added, please retry the above steps.

By disposing of this product correctly, you will help to conserve valuable natural resources and help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste disposal. Please contact your local authorities or the nearest collection point for more details. Incorrect disposal of this type of waste may result in fines in accordance with national regulations. Information for users on disposal of electrical and electronic equipment (business and industrial use): For detailed information on the correct disposal of electrical and electronic equipment, please contact your dealer or supplier. Information for users on disposal of electrical and electronic equipment in other countries outside the European Union: The above symbol (crossed-out wheeled bin) is only valid in European Union countries. For detailed information on the correct disposal of electrical and electronic equipment, please contact your local authorities or the dealer where you purchased the equipment. This is indicated by the crossed-out wheeled bin symbol on the product, packaging or printed materials.

Not intended for use near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Other precautions: Follow the rules for working with electrical appliances and connect the power cord only to the appropriate electrical sockets. The user is not authorized to disassemble the device or replace any of its parts. Opening or removing covers that are not originally intended for this purpose poses a risk of electric shock. Incorrect assembly and reconnection of the device also exposes you to the risk of electric shock.

Declaration of Conformity: Hereby, INTELEK LTD, organizační složka, declares that the device type MP5 (B810FK) is in compliance with Directive 2014/53/EU and others. The full EU declaration of conformity is available on the following website: www.iget.eu. The warranty period for the product is 24 months, unless otherwise stated.

RoHS: This device meets the requirements on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(Government Regulation No. 481/2012 Coll., which was amended by Government Regulation No. 391/2016 Coll.) and thus the requirements of Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The RoHS declaration can be downloaded from www.iget.eu. Exclusive manufacturer/importer of iGET products for the EU: INTELEK LTD, organizační složka, Ericha Roučky 1291/4, 627 00 Brno, Czech Republic, WEB: http://www.iget.eu SUPPORT: http://www.iget.eu/helpdesk Copyright © 2025 INTELEK LTD. All rights reserved.