Akwụkwọ ntuziaka onye ọrụ SuperLightingLED V1 Single Agba LED Controller

LED V1 Single Agba LED Controller
Akwụkwọ ntuziaka onye ọrụ1 ọwa/nzọụkwụ na-enweghị dimming / njikwa ikuku ikuku / nnyefe akpaaka / mekọrịta / Push Dim / ọtụtụ nchedo

ọdịnaya zoo

1 Atụmatụ

2 Nka nka

3 Ihe arụrụ arụ na nrụnye

4 Eserese waya

5 Njikwa Remote Match (ụzọ egwuregwu abụọ)

6 ndetu ngwa

7 Push Dim Ọrụ

8 Mgbidi Dimming

9 Ọkụ ịgbanwuo/ gbanyụọ oge na-agwụ

10 Nyocha Malfunctions & Nchọpụta nsogbu

11 Akwụkwọ / akụrụngwa

11.1 Ntụaka

12 Ozi ndị metụtara

Atụmatụ

Ọkwa 4096 0-100% na-ebelata nke ọma na-enweghị flash ọ bụla.
Dakọtara na otu mpaghara RF 2.4G ma ọ bụ ọtụtụ mpaghara na-ebelata njikwa ime anya.

Otu onye njikwa RF na-anabata njikwa ime ihe ruru iri.
Ọrụ nnyefe akpaaka: Onye njikwa na-ebunye akara na-akpaghị aka na njikwa ọzọ nwere anya njikwa 30m.

Mekọrịta na ọtụtụ njikwa.
Jikọọ na mgba ọkụ mpụta iji nweta mgbanyụ/ gbanyụọ yana 0-100% na-ebelata ọrụ.

Oge ịgbanwu/ gbanyụọ ọkụ 3s nwere ike họrọ.
Okpomọkụ / oke ibu / nchekwa sekit dị mkpụmkpụ, gbakee na-akpaghị aka.

Nka nka

Ntinye na ntinye
Ntinye voltage	5-36VDC
Tinye ugbu a	8.5A
Mmepụta voltage	5-36VDC
Mpụta ugbu a	1CH,8A
Ike mmepụta	40W/96W/192W/288W (5V/12V/24V/36V)
Ụdị mmepụta	Voltage
Nchekwa na EMC
Ọkọlọtọ EMC (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Ọkọlọtọ nchekwa (LVD)	EN 62368-1:2020+A11:2020
Ngwa redio (RED)	ETSI EN 300 328 V2.2.2
Asambodo	CE, EMC,LVD, uhie
Ibu
Mkpokọta nha	0.041kg
Nha ịbụ	0.052kg
Data na-ebelata
Mgbama ntinye	RF 2.4GHz + Push Dim
Anya njikwa	30m (Oghere enweghị mgbochi)
Agba ntụ na-ebelata	4096 (2 ^ 12) ọkwa
Oke mbelata	0-100%
Usoro na-ebelata	Logarithmic
Ugboro PWM	2000Hz (nke ndabara)
gburugburu
Okpomọkụ arụ ọrụ	Ta: -30 OC ~ +55 OC
Ọnọdụ okpomọkụ (Max.)	Tc: +85 C
Ogo IP	IP20
Akwụkwọ ikike na nchekwa
Akwụkwọ ikike	afọ 5
Nchedo	Ntughari polarity Oke ọkụ Ibu ibu Obere sekit

Ihe arụrụ arụ na nrụnye

Eserese waya

Njikwa Remote Match (ụzọ egwuregwu abụọ)

Ndị ọrụ ngwụcha nwere ike họrọ ụzọ egwuregwu/ihichapụ dabara adaba. A na-enye nhọrọ abụọ maka nhọrọ:

Jiri igodo Match nke njikwa
Asọmpi:
Pịa igodo egwuregwu dị mkpirikpi, wee pịa igodo ngbanyụ/ gbanyụọ ozugbo (otu mpaghara remote) ma ọ bụ igodo mpaghara (ọtụtụ mpaghara remote) na remote.
Ihe ngosi ọkụ ọkụ ọkụ ọkụ ugboro ole na ole pụtara na egwuregwu ahụ na-aga nke ọma.
Hichapụ:
Pịa ma jide igodo egwuregwu maka 5s ka ihichapụ egwuregwu niile, Ihe ngosi ọkụ ọkụ ọkụ ọkụ ugboro ole na ole pụtara na ehichapụrụ ihe niile dakọtara.

Jiri Malitegharịa ekwentị
Asọmpi:
Gbanyụọ ike nke nnata, wee gbanye ọkụ.
Tinyegharịa ọzọ.
Igodo mgbanyụ/ gbanyụọ ozugbo (otu mpaghara dịpụrụ adịpụ) ma ọ bụ igodo mpaghara (ọtụtụ mpaghara dịpụrụ adịpụ) ugboro 3 n'ime ime obodo.
Ìhè ahụ na-egbuke egbuke ugboro 3 pụtara na egwuregwu ahụ na-aga nke ọma.
Hichapụ:
Gbanyụọ ike nke nnata, wee gbanye ọkụ.
Tinyegharịa ọzọ.
Igodo mgbanyụ/ gbanyụọ ozugbo (otu mpaghara dịpụrụ adịpụ) ma ọ bụ igodo mpaghara (ọtụtụ mpaghara dịpụrụ adịpụ) ugboro 5 n'ime ime obodo.
Ìhè ahụ na-egbuke egbuke ugboro 5 pụtara na ehichapụrụ ihe niile dakọtara.

ndetu ngwa

Ndị nnata niile nọ n'otu mpaghara.

Na-ebufe akpaaka: Otu onye nnata nwere ike ibunye akara ngosi site na ebe dịpụrụ adịpụ gaa na onye nnata ọzọ n'ime 30m, ọ bụrụhaala na enwere onye nnata n'ime 30m, enwere ike ịgbatị ebe njikwa anya.
Mmekọrịta akpaaka: Ọtụtụ ndị nnata nọ n'ebe dị anya 30m nwere ike ịrụ ọrụ n'otu oge mgbe otu ime obodo na-achịkwa ha.
Ndokwa onye nnata nwere ike inye ihe ruru 30m nzikọrịta ozi. Ọla na ihe ndị ọzọ ígwè ga-ebelata oke.
Ebe mgbama siri ike dị ka ndị na-anya WiFi na oven microwave ga-emetụta oke ahụ.
Anyị na-akwado maka ngwa ime ụlọ na ntinye nnata ekwesịghị ịbụ ihe karịrị 15m.

Onye nnata ọ bụla (otu ma ọ bụ karịa) na mpaghara dị iche, dịka mpaghara 1, 2, 3 ma ọ bụ 4.

Push Dim Ọrụ

Ihe nrụnye Push-Dim nyere na-enye ohere maka usoro ntugharị dị mfe site na iji mgba ọkụ mgbidi na-adịghị adị (obere oge).

Mpempe akwụkwọ:
Gbanyụọ ma ọ bụ gbanyụọ ọkụ.
Pịa ogologo (1-6s):
Pịa ma jide ka ị na-akụda obere nzọụkwụ,
Na ogologo ntanye ọ bụla ọzọ, ọkwa ọkụ na-aga n'akụkụ nke ọzọ.

Ebe nchekwa na-ebelata:
Ìhè na-alaghachi n'ọkwa ndahie gara aga mgbe agbanyụrụ ya ma gbanye ya ọzọ, ọbụlagodi na ọdịda ọkụ.
Mmekọrịta:
Ọ bụrụ na ejikọrọ ihe karịrị otu njikwa na otu mgba ọkụ ahụ, mee ogologo pịa maka ihe karịrị 10s, mgbe ahụ, a na-emekọrịta usoro ahụ na ọkụ niile dị na otu ahụ na-ebelata ruo 100%.
Nke a pụtara na ọ dịghị mkpa maka waya synchrony ọzọ na nrụnye buru ibu.
Anyị na-akwado ọnụ ọgụgụ nke ndị na-ahụ maka njikwa na-ejikọta na nkwụnye ọkụ adịghị agafe 25 iberibe, Ogologo kachasị nke wires site na ntinye aka na njikwa kwesịrị ịbụ ihe karịrị 20 mita.

Mgbidi Dimming

Ọkụ ịgbanwuo/ gbanyụọ oge na-agwụ

Ogologo pịa igodo egwuregwu 5s, wee pịa igodo egwuregwu mkpirisi ugboro 3, oge ịgbanyụ/mnyụ ọkụ ga-atọkwa 3s, ọkụ na-egosi na-atụgharị ugboro atọ.
Ogologo pịa igodo egwuregwu 10s, weghachi paramita ndabara nke ụlọ ọrụ, oge ịgbanwu/ gbanyụọ ọkụ na-eweghachikwa na 0.5s.

Nyocha Malfunctions & Nchọpụta nsogbu

Ihe na-adịghị mma	Ihe kpatara ya	Nchọpụta nsogbu
Enweghị ọkụ	1 . Enweghị ike. 2. Njikọ na-ezighị ezi ma ọ bụ enweghị nchebe.	1. Lelee ike. 2. Lelee njikọ.
Ike na-ekwekọghị ekwekọ n'etiti ihu na azụ, yana voltage dobe	1. USB mmepụta dị ogologo. 2. Dayameta waya dị obere. 3. Ibufe karịrị ike ọkọnọ ike. 4. Ibufe karịrị ikike njikwa.	1. Belata ọkọnọ ma ọ bụ loop. 2. Gbanwee waya sara mbara. 3. Dochie ọkụ eletrik dị elu. 4. Tinye ike repeater.
Enweghị nzaghachi sitere na ime ime	1. Batrị enweghị ike. 2. Gafefe anya njikwa. 3. Onye njikwa adabaghị na remote.	1. Dochie batrị. 2. Belata ebe dị anya. 3. Re-dakọtara na remote.