SmartGen HMC9800RM Njikwa nlekota anya
SmartGen - mee ka jenerato gị mara ihe
Mara mma
Ụgwọ nke ụlọ ọrụ G en Technology Co., Ltd
Nọmba 28 Jinsuo Road
Obodo Zhengzhou
PR
China
Tel:
0086-371-67988888
0086-371-67981888
0086-371-67991553
0086-371-67992951
0086-371-67981000 (mba ofesi)
Faksị: 0086 371 67992952
Web: www.smartgen.com.cn
www.smartgen.cn
Email: sales@smartgen.cn
Ikike niile echekwabara. Enweghị akụkụ nke akwụkwọ a nwere ike ịmegharị n'ụdị ọ bụla (gụnyere ịse foto ma ọ bụ chekwaa n'ụdị ọ bụla site na ngwa eletrọnịkị ma ọ bụ ihe ọzọ) na-enwetaghị ikike ederede nke onye nwe nwebisiinka.
Ngwa maka ikike ederede nke onye nwe nwebisiinka iji megharịa akụkụ ọ bụla nke akwụkwọ a kwesịrị ka ezigara SmartGen Technology n'adres dị n'elu.
Ntụtụ aka ọ bụla gbasara aha ngwaahịa ejirila n'ime akwụkwọ a bụ nke ụlọ ọrụ ha nwe.
Teknụzụ SmartGen nwere ikike ịgbanwe ọdịnaya nke akwụkwọ a na-enweghị ọkwa mbụ.
Isiokwu 1 Ụdị akụkọ ihe mere eme
| Ụbọchị | Ụdị | Ọdịnaya |
| 2018-09-20 | 1.0 | Ntọhapụ izizi |
GỤKWUOVIEW
HMC
9800 RM bụ a remote monitoring modul maka HMC4000 engine njikwa nke a na-eji maka ime nlekota usoro nke otu unit iji nweta remote mmalite / kwụsị mmiri engine, data nha, mkpu s ngosi na wdg ọrụ site RS485 n'ọdụ ụgbọ mmiri. Mita dị na modul ahụ nwere ike mekọrịta aha na ọnụ ụzọ mkpu ozugbo nke onye njikwa HMC4000 setịpụrụ, na mita ọ bụla nwere ike ịtọ ọkwa dị iche iche na isi mmalite data.
Arụmarụ na Àgwà
Isi njirimara bụ ndị a:
- 8 inch LCD nwere mkpebi 800 * 600;
- Ndị ọrụ nwere ike ịkọwa isi iyi data, oke na mkpebi nke mita ọ bụla;
- Mpaghara ngosi mkpu mita ọ bụla nwere ike mekọrịta ọnụ ụzọ mkpu nke setịpụrụ na-akpaghị aka
HMC4000 njikwa - Aha mita ọ bụla nwere ike mekọrịta na akpaghị aka aha sensọ nke onye njikwa HMC4000 setịpụrụ;
- Kwado nkwukọrịta CANBUS na nkwukọrịta RS485;
- Na LCD brilliance larịị (5 ọkwa) button ngbanwe, ọ na-adabara anyị e na iche iche n'oge;
- A ga-eji modul a na njikwa nnabata;
- Igwe ọkụ zuru oke 1 8 ~ 35) VDC iji mezuo ihe achọrọ dị iche iche voltage nke mmalite batrị;
- Nhazi modular, ụzọ nrụnye agbakwunyere; kọmpat Ọdịdị na mfe arịọnụ
TECHNIC AL PARAMETERS
Isiokwu 2 Nka na ụzụ Parameters
| Ihe | Ọdịnaya |
| Vol -arụ ọrụ Voltage | DC18.0V ruo DC35.0V, ọkụ ọkụ anaghị akwụsị akwụsị. |
| N'ozuzu ike oriri | <8W |
| RS485 Baud ọnụego | 9600bps |
| Icha ọkụ LCD | Enwere ike ịhazi ọkwa 5 |
| Akụkụ ikpe | 262mm x 180mm x 58mm |
| Mbelata panel | 243mm x 148mm |
| Ọnọdụ ọrụ | Okpomọkụ: (-25~+70)ºC; Iru mmiri dị ala: (20 ~ 93)% RH |
| Ọnọdụ Nchekwa | Okpomọkụ: (-25 ~ + 70)ºC |
| Ibu | 0.95kg |
Ọrụ
Nkọwa ọrụ igodo
Tebụl 3- Nkọwa bọtịnụ ịpị:
Ngosipụta LCD
Ọnweghị ihe ngosi data ike
Data niile egosiri na HMC9800RM bụ ezigbo oge anakọtara site na HMC4000 site na ọdụ ụgbọ mmiri RS485. Ihuenyo ngosi akọwapụtara dị ka n'okpuru,
Mita: ọ nwere mita ise, d nwere ike ịhazi ebe data, oke na mkpebi nke mita ọ bụla. Aha mita ọ bụla na mpaghara ngosipụta ọnụ ụzọ mkpu (akụkụ ebe agba uhie na odo) ga-agbanwe site na ntọala nke njikwa HMC5.
Maka example, mita okpomọkụ mmiri na-egosi dị ka n'okpuru,
Data nke mita a sitere na ihe mmetụta 1 data, aha bụ mmiri okpomọkụ. Ngosipụta mkpebi bụ 1 1; Oti mkpu bụ 98 98 ℃; njedebe nkwụsị bụ 100 ℃.
b) Ọnọdụ: ọnọdụ engine na ọnọdụ njikwa bụ ezigbo oge gosipụtara na modul a.
c) Mkpu: ọ bụrụ na ọ dịghị mkpu eme, akara ngosi na-egosi dị ka agba ọcha; ọ bụrụ na mkpu ịdọ aka ná ntị emee, ma akara ngosi na ozi mkpu na-egosipụta dị ka agba odo; Ọ bụrụ na oti mkpu na-emechi, ma akara ngosi na ozi mkpu na-egosipụta dị ka agba uhie.
d) Ngosipụta nzikọrịta ozi: Mgbe nzikọrịta ozi na-adịkarị, akara TX na akara ngosi RX na-agbanye ọzọ maka 500ms; mgbe nzikọrịta ozi daa, akara ngosi RX na-agbapụta agbacha ma ọ naghị agba ọkụ.
Egosiri ọkwa nzikọrịta ozi dịka ọdịda nzikọrịta ozi.
NA IKE DATA DI SPLAY
Data niile egosiri na HMC9800RM bụ ezigbo oge anakọtara site na HMC4000 site na ọdụ ụgbọ mmiri RS485. Ihuenyo ngosi akọwapụtara dị ka n'okpuru,
a) Batrị: Ọ bụrụ na data mita ọ bụla si na batrị voltage, akara ngosi batrị na ala aka ekpe ga-apụ n'anya na-akpaghị aka; ma ọ bụghị ya, batrị voltage ga-egosipụta na ala aka ekpe.
b) Enwere ike ịhọrọ isi mmalite data columnar site na sensọ 14 na oke a nwekwara ike họrọ. Ọ na-apụ n'anya na-akpaghị aka ma họrọ ịghara iji ya.
Ọrụ
Pịa
Bọtịnụ ọnọdụ dịpụrụ adịpụ na panel HMC4000, onye njikwa na-abanye n'ime ọnọdụ dịpụrụ adịpụ. Ndị ọrụ nwere ike ịmalite mmalite/kwụsị injin site na njikwa HMC9800RM mgbe ọnọdụ dịpụrụ adịpụ na-arụ ọrụ.
- Mmalite dịpụrụ adịpụ
Pịa
nke HGM9800RM, ozi nkwenye ga-egosipụta na LCD nke njikwa. Mgbe ekwenyechara, onye njikwa na-amalite ịja mma na ịgụta ozi nke mmalite igbu oge tupu ikpo ọkụ, nchekwa n'oge, ịmalite igbu oge, oge ikpo ọkụ na wdg ga-egosipụta na LCD nke njikwa njikwa dị iche iche engine co nfiguration nwere ọdịnaya ngosi dị iche iche. - Nkwụsị anya
Pịa
nke HGM9800RM, ozi nkwenye ga-egosipụta na LCD nke njikwa. Mgbe ekwenyechara, onye njikwa na-amalite st op commend na ịgụta ozi nke igbu oge jụrụ oyi, igbu oge st op, igbu oge ETS, chere oge nkwụsị na wdg ga-egosipụta na LCD nke njikwa (nhazi engine dị iche iche nwere ọdịnaya ngosi dị iche iche.
IHE:
Ọ bụrụ na oti mkpu na-acha uhie uhie n'oge usoro mmalite/nkwụsị, ozi mkpu ga-egosipụta gakọrịtara na ekwentị
LCD nke HMC9800 RM.
Nhazi nhazi
Ngosipụta nke mita 5 na 2 c olumnar tables nwere ike ịhazi site na njikwa, nkọwa nke nhazi nhazi dị n'okpuru,
Tebụl 4 Ndepụta nhazi nhazi
| Mba. | Aha oke | Oke | Ọdabara | kwuo | |
| 1. |
Ntọala 1 mita |
Isi mmalite data | 0-31 | 2: Sensor1 Data | Ebe data biko hụ
Tebụl 5 |
| 2. | Ogologo mita | 15-3000 | 150 | ||
| 3. | Mkpebi | 1-100 | 1 | ||
| 4. |
Ntọala 2 mita |
Isi mmalite data | 0-31 | 3: Sensor 2 Data | Ebe data biko hụ
Tebụl 5 |
| 5. | Ogologo mita | 15-3000 | 1000 | ||
| 6. | Mkpebi | 1-100 | 100 | ||
| 7. |
Ntọala 3 mita |
Isi mmalite data | Edoziri dị ka ọsọ | Edoziri dị ka ọsọ | |
| 8. | Ogologo mita | 15-3000 | 3000 | ||
| 9. | Mkpebi | 1-100 | 100 | ||
| 10. |
Ntọala 4 mita |
Isi mmalite data | 0-31 | 4: Sensor 3 Data | Ebe data biko hụ
Tebụl 5 |
| 11. | Ogologo mita | 15-3000 | 150 | ||
| Mba. | Aha oke | Oke | Ọdabara | kwuo | |
| 12. | Mkpebi | 1-100 | 1 | ||
| 13. |
Ntọala 5 mita |
Isi mmalite data | 0-31 | 5: Sensor 4 Data | Ebe data biko hụ
Tebụl 5 |
| 14. | Ogologo mita | 15-3000 | 1000 | ||
| 15. | Mkpebi | 1-100 | 100 | ||
| 16. |
Ntọala 6 mita |
Isi mmalite data | 0-4 | 0: Ejighị ya | Oke a na-ahọpụta nke mita 6
Ebe data bụ ihe mmetụta 1 ~ sensọ 4. |
| 17. | Ogologo mita | 15-3000 | 1000 | ||
| 18. |
Ntọala 7 mita |
Isi mmalite data | 0-4 | 0: Ejighị ya | Oke a na-ahọpụta nke mita 7
Ebe data bụ ihe mmetụta 1 ~ sensọ 4. |
| 19. | Ogologo mita | 15-3000 | 1000 | ||
| 20. | Agba agba | 0-2
0: agba ndụ 1: Agba aja aja 2: Purple |
0: agba ndụ | Oke a nwere ike ịgbanwe agba ngosi nke mita. Ọ na-arụsi ọrụ ike mgbe ikeghachi
elu. |
|
| 21. | Nhazi nọmba Genset | 1-9 | 1 | Nke a oke nwere ike hazie nke engine a ga-nyocha. Isi ihuenyo ga-egosipụta nọmba genset metụtara dịka ntọala siri dị. | |
Isiokwu 5 Ndepụta Isi mmalite data
| Mba. | Isi mmalite data | kwuo |
| 0. | Echekwara | |
| 1. | Echekwara | |
| 2. | Ihe mmetụta 1 Data | |
| 3. | Ihe mmetụta 2 Data | |
| 4. | Ihe mmetụta 3 Data | |
| 5. | Ihe mmetụta 4 Data | |
| 6. | Ntinye batrị | |
| 7. | Nrụgide mmanụ ụgbọala (ECU) | |
| 8. | Echekwara | |
| 9. | Echekwara | |
| 10. | Generator UA | |
| 11. | Generator UB | |
| 12. | Generator UC |
| Mba. | Isi mmalite data | kwuo |
| 13. | Generator UAB | |
| 14. | Generator UBC | |
| 15. | Generator UCA | |
| 16. | Ugboro ugboro | |
| 17. | Usoro dị ugbu a | |
| 18. | Usoro B dị ugbu a | |
| 19. | Usoro C dị ugbu a | |
| 20. | Echekwara | |
| 21. | Echekwara | |
| 22. | Echekwara | |
| 23. | Mgbakọta Ike | |
| 24. | Echekwara | |
| 25. | Echekwara | |
| 26. | Echekwara | |
| 27. | Echekwara | |
| 28. | Echekwara | |
| 29. | Echekwara | |
| 30. | Echekwara | |
| 31. | Echekwara |
Njikọ WIRING
Ihe osise 4 HMC9 800RM Ọnụ Ọdụdọ
Tebụl 6 Nkọwa njikọ wiring ọnụ
| Mba. | Ọrụ | USB | kwuo |
| 1 | B- | 1.0mm2 | Ihe na-adịghị mma nke ntinye ọkụ DC |
| 2 | B+ | 1.0mm2 | Ihe dị mma nke ntinye ọkụ DC |
| 3 | NC | Ejikọtaghị ya | |
| 4 | CAN (H) |
0.5mm2 |
Ọ bụ ọdụ ụgbọ mmiri CANBUS nke ya na onye na-ahụ maka ndị ọbịa na-ekwurịta okwu; A na-atụ aro waya mkpuchi impedance-120Ω site na iji ájá nwere otu njedebe ya. |
| 5 | CAN (L) | ||
| 6 | 120Ω | ||
| 7 | RS485(A+) |
0.5mm2 |
Ọ bụ ọdụ ụgbọ mmiri CANBUS nke ya na onye na-ahụ maka ndị ọbịa na-ekwurịta okwu; A na-atụ aro waya mkpuchi impedance-120Ω site na iji ájá nwere otu njedebe ya. |
| 8 | RS485(B-) | ||
| 9 | 120Ω | ||
| USB | Ọ bụ ọdụ ụgbọ mmiri iji hazie parameters. | ||
Ngwa ngwa
HMC9800RM na-ekwurịta okwu na HMC4000 site na ọdụ ụgbọ mmiri RS485. A ga-ahọpụtarịrị HMC4 HMC4000RM na HMC4000 tupu nzikọrịta ozi. Ngwa nkọwa dị ka n'okpuru, 
N'ozuzu na nwụnye akụkụ
Nchọpụta nsogbu
Isiokwu 7- Nchọpụta nsogbu
| Nsogbu | Ngwọta enwere ike |
| Onye njikwa enweghị nzaghachi ya
ike. |
Lelee wiwi njikọ njikwa; |
| Ọdịda nzikọrịta ozi | Lelee wiwi njikọ RS485. |
| Nnukwu njehie nke ngosipụta data mita | Lelee izi ezi nke ntọala mita agbagoro. |
Akwụkwọ / akụrụngwa
 |
SmartGen HMC9800RM Njikwa nlekota anya [pdf] Akwụkwọ ntuziaka onye ọrụ HMC9800RM Onye njikwa nleba anya anya, HMC9800RM, njikwa nleba anya, njikwa nleba anya, njikwa |
 |
SmartGen HMC9800RM Njikwa nlekota anya [pdf] Akwụkwọ ntuziaka onye ọrụ HMC9800RM. |
